Bu çalışmada Toz Metalurjisi (TM) yöntemi ile üretilmiş % 0,4 C’lu çeliklerin deformasyon yaşlanması üzerine tavlama sıcaklıklarının etkisi incelenmiştir. Bu amaçla saf demir tozuna, ağırlıkça % 0,4 oranında doğal grafit tozu ve yağlayıcı olarak ise ağırlıkça % 0,3 çinko stearat ilave edilmiştir. Elde edilen toz karışımları, oda sıcaklığında ve tek etkili kalıpta 700 MPa presleme basıncında şekillendirilerek mikro çekme test numuneleri üretilmiştir. Ardından 1180 ºC sıcaklıkta saf argon gazı atmosferi altında 30 dk boyunca sinterlenme işlemine bırakılmıştır. Sinterlenme işlemi sonrasında üretilen orta karbonlu toz metal çeliklere %4 oranında ön deformasyon uygulanmıştır. Ardından sırasıyla 200, 300 ve 400ºC sıcaklıklarda 30 dakika süre yaşlandırma işlemi gerçekleştirilmiştir. Yapılan deformasyon yaşlanması sonrası, toz metal çeliklerin; mikroyapı, sertlik, kırık yüzey ve çekme özellikleri araştırılmıştır. Statik deformasyon sonucunda en yüksek akma dayanımı ve sertlik değeri 200 ºC’de statik deformsyon yaşlanması uygulanan numunelerde görülmüştür.
In this study, the impact of deformation ageing of 0.4% C steel produced by the method of dust metallurgy (TM) was studied. For this purpose, the pure iron powder, natural graphite powder with a weight of 0.4%, and stearate with a weight of 0.3%, is added as a fertilizer. The obtained powder mixtures are formed at a pressure of 700 MPa at room temperature and in a single effective form, and micro-tracking test samples are produced. Then, at a temperature of 1180 oC, the pure argon gas was left to the synthesis process for 30 minutes under the atmosphere. After the synthesis process, a 4 percent pre-deformation was applied to medium-carbon powder metal steels produced. The ageing process was then carried out for 30 minutes at temperatures of 200, 300 and 400oC respectively. After the deformation made ageing, the powder metal steel; microbuilding, hardness, broken surface and drawing properties have been studied. As a result of static deformation, the highest flow resistance and hardness values were observed at 200 oC in static deformation aging applied samples.
Alan : Mühendislik
Dergi Türü : Ulusal
Benzer Makaleler | Yazar | # |
---|
Makale | Yazar | # |
---|