Lifli betonlar sahip oldukları yüksek eğilme dayanımı ve içeriğinde kullanılan liflerin yüksek çekme dayanımı sayesinde çeşitli endüstriyel uygulamalarda, fabrika zeminlerinde, benzin istasyonlarında, prefabrik beton uygulamalarında yaygın olarak tercih edilmektedir. Bu çalışmada, aynı işlenebilirliğe sahip olan rastgele yönlenmiş cam ve çelik lifli betonlar ile tabakalı çelik tel ve cam elyaf ağları içeren beton kompozitlerin eğilme dayanımları incelenmiştir. Hacimce %0.5, %1 ve %1.5 oranlarında lif kullanılarak rastgele yönlenmiş cam ve çelik lifli beton grupları oluşturulmuştur. Çelik tel veya cam elyaf ağları içeren tabakalı beton kompozitler, rastgele yönlenmiş cam veya çelik lifli betonların lif hacmine eşdeğer olması için 3, 5 ve 7 tabakalı olarak üretilmiştir. Sonuçlar incelendiğinde tabakalı lifli beton kompozitlerin eğilme dayanımlarının, aynı işlenebilirliğe sahip rastgele yönlenmiş lifli betonların eğilme dayanımlarından lif türü fark etmeksizin daha yüksek olduğu belirlenmiş olup tabakalı lifli beton kompozitlerin üretiminde yüksek eğilme dayanımı ve uygun işlenebilirlik için herhangi bir kimyasal katkı kullanımının gerekmediği tespit edilmiştir. Ayrıca tabakalı çelik telli beton kompozitlerin eğilme dayanımlarının, tabakalı cam elyaflı beton kompozitlerin eğilme dayanımlarından daha yüksek olduğu ve tabaka sayısının çelik telli beton kompozitlerde eğilme dayanımı sonuçlarını daha fazla etkilediği belirlenmiştir.
Fiber concrete is widely preferred in various industrial applications, factory pavements, gas stations, and prefabricated concrete applications thanks to the high flexural strength and high tensile strength of the fibers used in its content. In this study, the flexural strengths of randomly oriented glass and steel fiber concretes with the same workability and concrete composites containing layered steel wire and glass fiber mesh were investigated. By using 0.5%, 1% and 1.5% fiber by volume, randomly oriented glass and steel fiber concrete groups were formed Laminated concrete composites containing steel wire or glass fiber meshes are produced with 3, 5 and 7 layers to be equivalent to the fiber volume of randomly oriented glass or steel fiber concretes. When the results are examined; It has been determined that the flexural strength of laminated fiber concrete composites is higher than the flexural strength of randomly oriented fiber concrete with the same workability, regardless of fiber type, and it has been determined that no chemical additives are required in the production of laminated fiber concrete composites for high flexural strength and suitable workability. In addition, it has been determined that the flexural strength of the laminated steel wire concrete composites is higher than the flexural strength of the laminated glass fiber concrete composites and the number of layers affects the flexural strength results in more in the steel wire concrete composites.
Alan : Fen Bilimleri ve Matematik; Mühendislik
Dergi Türü : Ulusal
Benzer Makaleler | Yazar | # |
---|
Makale | Yazar | # |
---|