Çalışma kapsamda kullanılan huş (Betula pendula L) odunu Ukrayna’nın batı bölgelerinden Türkiye’deki Kastamonu İnebolu Limanına özel bir firma tarafından getirilmiştir. İnebolu Limanı’ndan Kastamonu Organize Sanayi Bölgesinde faaliyette bulunan özel bir orta yoğunlukta lif levha (MDF) üreten fabrikaya getirilmiştir. Çalışmada %100 huş odununun liflerinden MDF üretimi yapılmıştır. MDF üretimde 0.96 mol E1 üre formaldehit tutkalı farklı oranlarda kullanarak levhalar üretilmiştir. Bu levhaların test performansları için deney numuneleri sonsuz bant pres hattında imal edilmiştir. Test üretiminde dört farklı yüzde oranlarda (%10.05, %12.96, %13.46 ve %13.94) tutkal kullanılmıştır. Tutkal tüketim oranlarına göre MDF levhalarının fiziksel (levha yoğunluğu, kalınlığına şişme, su alma) ve mekanik (eğilme mukavemeti, eğilmede elastikiyet modülü, çekme mukavemeti, levha vida tutma mukavemeti) test performansları ölçülmüştür. Sonuç olarak MDF üretiminde üre formaldehit tüketim yüzdesi artıkça levhaların performans değerlerinin azaldığı tespit edilmiştir. Huş odunundan MDF üretirken, performansı optimum test sonuçlarını veren tutkal tüketimine göre levha üretimi gerçekleştirilmelidir.
The wood used in the work framework (Betula pendula L) was brought from the western regions of Ukraine to the Kastamonu Inebolu Port in Turkey by a private company. It was brought to the factory that produces a special medium-intensity fiber sheet (MDF) that is operating in the Kastamonu Organized Industrial Area from the Inebolu Port. In the study, MDF was produced from 100% wood fiber. In MDF production, 0.96 mol E1 urine formaldehyde bonds are produced using different proportions of leaves. Experimental samples for the test performance of these sheets are manufactured on the infinite band press line. In the test production four different percentages (10.05%, 12.96, 13.46 and 13.94%) were used. According to touch consumption rates, the physical and mechanical performance of the MDF sheets (leaf intensity, thickness swelling, water absorption) and the test performance of the MDF sheets (leaf strength, inclination elasticity module, drawing strength, leaf holding strength) are measured. As a result, the percentage of urine formaldehyde consumption in the production of MDF has been found that the performance values of the leaves are reduced. When producing MDF from hush wood, sheet production should be carried out according to the coating consumption that gives optimal performance test results.
Alan : Mimarlık, Planlama ve Tasarım; Mühendislik; Ziraat, Orman ve Su Ürünleri
Dergi Türü : Uluslararası
Benzer Makaleler | Yazar | # |
---|
Makale | Yazar | # |
---|