Bu çalışma geleneksel (beton ve çimen harman; BH, ÇH, sırasıyla) ve suni kurutma (kurutma makinesi, KM) yöntemlerinin Tombul, Palaz ve Ordu Levant fındıklarının fiziksel özellikleri üzerine etkisini belirlemek amacıyla 2015 yılında yürütülmüştür. Bu amaçla, çalışmada meyve uzunluğu, meyve genişliği, meyve kalınlığı, iç uzunluğu, iç genişliği, iç kalınlığı, meyve büyüklüğü, meyve şekil indeksi, kabuk kalınlığı, göbek boşluğu, buruşuk iç oranı, meyve ağırlığı, iç ağırlığı, iç oranı, sağlam iç oranı (SİO), kusurlu iç oranı (KİO) ve beyazlama oranı gibi fiziksel özellikler incelenmiştir. Çalışma sonucunda, KM metodunda SİO değeri BH ve ÇH metotlarına göre daha yüksek bulunmuştur. Ayrıca KİO değeri en düşük olarak yine KM metodunda tespit edilmiştir. Bu yüzden KM metodunun fındık kurutma için uygun olduğu söylenebilir.
This study was carried out in 2015 with the aim of determining the effects of traditional (beton and grass mix; BH, CH, respectively) and artificial drying methods (drying machine, KM) on the physical characteristics of Tombul, Palaz and Army Levant nuts. For this purpose, the study studied physical characteristics such as fruit length, fruit width, fruit thickness, internal length, internal width, internal thickness, fruit size, fruit shape index, crop thickness, stomach gap, frog internal proportion, fruit weight, internal weight, internal proportion, solid internal proportion (SIO), defective internal proportion (KIO) and whitewashing proportion. The study found that the SIO value in the KM method was higher than the BH and CH methods. The lowest value is also identified in the KM method. Therefore, it can be said that the KM method is suitable for nuts drying.
This study was conducted in 2015 and aimed to determine the effects of hazelnut drying machine (DM) and traditional–drying (concrete and grass ground; CG and GG, respectively) methods on the physical properties of Tombul, Palaz, and Ordu Levant cultivars. For this purpose, namely nut lenght, nut width, nut depth, kernel lenght, kernel width, kernel depth, nut size, shape index, shell thickness, kernel cavity, shrivel kernel ratio, nut weight, kernel weight, kernel percentage, good kernel (GK), defect kernel (DK), and blanching ability were analyzed. At the end of the study, the GK value was found higher in DM method than on CG and GG methods. Therefore, DM is suitable method for hazelnut drying.
Field : Ziraat, Orman ve Su Ürünleri
Journal Type : Ulusal
Relevant Articles | Author | # |
---|
Article | Author | # |
---|