Kullanım Kılavuzu
Neden sadece 3 sonuç görüntüleyebiliyorum?
Sadece üye olan kurumların ağından bağlandığınız da tüm sonuçları görüntüleyebilirsiniz. Üye olmayan kurumlar için kurum yetkililerinin başvurması durumunda 1 aylık ücretsiz deneme sürümü açmaktayız.
Benim olmayan çok sonuç geliyor?
Birçok kaynakça da atıflar "Soyad, İ" olarak gösterildiği için özellikle Soyad ve isminin baş harfi aynı olan akademisyenlerin atıfları zaman zaman karışabilmektedir. Bu sorun tüm dünyadaki atıf dizinlerinin sıkça karşılaştığı bir sorundur.
Sadece ilgili makaleme yapılan atıfları nasıl görebilirim?
Makalenizin ismini arattıktan sonra detaylar kısmına bastığınız anda seçtiğiniz makaleye yapılan atıfları görebilirsiniz.
 Görüntüleme 18
 İndirme 7
Investigation Of The Electrochromic Properties Of Ni(oh)2 Films On Glass With Ito­ni Bilayer Coating
2018
Dergi:  
Eastern-European Journal of Enterprise Technologies
Yazar:  
Özet:

Electrochromic films have been deposited onto glass coated with indium-tin oxide (ITO) and glass with ITO and a thin layer of metallic nickel deposited onto it. Nickel was deposited onto the surface of the ITO coating from nickel electroplating solution. The metallic nickel was deposited onto the surface of ITO at the following parameters – cathodic current density 0.5 A/dn2, deposition time 3 s. Such deposition parameters were chosen, because at longer deposition time and (or) higher current density, the deposited layer of metallic nickel became opaque. The two substrates were then used in the deposition of Ni(OH)2 electrochromic films using the cathodic template synthesis method. As a result, it was revealed that the electrochromic film deposited onto glass with ITO-Ni coating possesses higher specific characteristics than that deposited on bare ITO-coated glass: higher coloration degree and higher oxidation-reduction currents on the cyclic voltamperogram. However, it was also revealed that the film possessing better characteristics, on the contrary, has lower reversibility of the coloration-bleaching process. Based on the obtained data, the mechanism that explains the role of the intermediate metal layer was proposed. The mechanism is that the deposited layer of metallic nickel forms additional contacts between the substrate surface and the electrochromic film. The nickel layer can also assist in securing the electrochromic film, and during film deposition has a positive effect on current distribution. On the other hand, the lower reversibility of the coloration-bleaching process of the film on ITO-Ni coating can be explained by gradual oxidation of metallic nickel in the basic medium. At the same time, it was revealed that deposition of metallic nickel leads to some decrease of the substrate transparency. Author Biographies Valerii Kotok, Ukrainian State University of Chemical Technology Gagarina ave., 8, Dnipro, Ukraine, 49005 Federal State Educational Institution of Higher Education "Vyatka State University" Moskovskaya str., 36, Kirov, Russian Federation, 610000 PhD, Associate Professor Department of Processes, Apparatus and General Chemical Technology Department of Technologies of Inorganic Substances and Electrochemical Manufacturing

Anahtar Kelimeler:

Atıf Yapanlar
Bilgi: Bu yayına herhangi bir atıf yapılmamıştır.
Benzer Makaleler










Eastern-European Journal of Enterprise Technologies

Alan :   Fen Bilimleri ve Matematik

Dergi Türü :   Uluslararası

Metrikler
Makale : 4.764
Atıf : 4.476
© 2015-2024 Sobiad Atıf Dizini