Amaç: Bu çalışmanın amacı WaveOne Gold, Reciproc Blue ve North Profa RC Blue nikel titanyum (NiTi) tek eğe döner sistemlerin vücut sıcaklığında döngüsel yorgunluğa bağlı kırılma dirençlerinin karşılaştırılmasıdır. Gereç ve Yöntemler: Bu çalışmada WaveOne Gold, Reciproc Blue ve North Profa RC Blue döner eğe sistemlerinin her birinden on ikişer adet kullanıldı. Tüm eğeler statik model döngüsel yorgunluk deney düzeneğinde, 60°’lik kurvatür açısına, 5 mm kurvatür yarıçapına ve 1,4 mm kanal iç çapına sahip seramik yapay kanallarda ve 37°C’de kırılıncaya kadar kullanıldı. Eğelerin kırılma zamanı dijital kronometre ile kaydedildi ve kırılıncaya kadarki tur sayıları hesaplandı. Normal dağılım göstermediği saptanan veriler Kruskal-Wallis H testi ile analiz edildi. Tahmini sağlam kalma oranının belirlenmesi için Weibull analizi yapıldı. Bulgular: North Profa RC Blue grubu ile Reciproc Blue grubu arasında ve Reciproc Blue grubu ile WaveOne Gold grubu arasında döngüsel yorgunluk direnci bakımından istatistiksel olarak anlamlı bir fark görülmedi (p> 0.05). North Profa RC Blue eğelerin döngüsel yorgunluk direnci WaveOne Gold eğelerden istatistiksel olarak anlamlı derecede yüksek bulundu (p <0.05). Kırık yüzeylerden alınan SEM görüntüleri incelenerek aletlerin döngüsel yorgunluk sonucunda kırıldığı doğrulandı. Sonuç: Bu çalışmada, North Profa RC Blue ve Reciproc Blue eğelerin döngüsel yorgunluk dirençleri arasında fark bulunmazken, WaveOne Gold eğelerin döngüsel yorgunluk direnci North Profa RC Blue eğelerden daha düşük bulundu.
Purpose: The purpose of this study is to compare WaveOne Gold, Reciproc Blue and North Profa RC Blue Nickel Titanium (NiTi) single-wheel-wheel-wheel-wheel-wheel-wheel-wheel-wheel-wheel-wheel-wheel-wheel-wheel-wheel-wheel-wheel-wheel-wheel-wheel-wheel-wheel-wheel-wheel-wheel-wheel-wheel-wheel-wheel-wheel-wheel-wheel-wheel. Tools and Methods: This study used twelve pieces of each of the WaveOne Gold, Reciproc Blue and North Profa RC Blue rotating curve systems. All curves were used in the static model circular fatigue experimental arrangement, in the ceramic artificial channels with a curvator angle of 60°, a curvator radius of 5 mm and a channel diameter of 1.4 mm, and until breaking at 37°C. The time of breakdown of the curves was recorded by the digital chronometre and the round numbers until it was broken were calculated. The data found that there was no normal distribution were analyzed by the Kruskal-Wallis H test. Weibull analysis was conducted to determine the forecast stable stay rate. Results: There was no statistically significant difference between the North Profa RC Blue group and the Reciproc Blue group and the Reciproc Blue group and the WaveOne Gold group in terms of cyclic fatigue resistance (p> 0.05). The cyclic fatigue resistance of the North Profa RC Blue curves was statistically significantly high from the WaveOne Gold curves (p <0.05). The exam of SEM images taken from broken surfaces confirmed that the tools were broken as a result of cyclic fatigue. In this study, there was no difference between the cyclic fatigue resistance of the North Profa RC Blue and Reciproc Blue curves, while the cyclic fatigue resistance of the WaveOne Gold curves was found lower than the North Profa RC Blue curves.
Alan : Sağlık Bilimleri
Dergi Türü : Ulusal
Benzer Makaleler | Yazar | # |
---|
Makale | Yazar | # |
---|