Özet:

Pico hydro turbines are suitable for low head applications in power plants since their efficiency is more stable than other turbine types. In some situations, computational fluid dynamics (CFD) has also been utilized as well as experimental studies for the performance prediction of water turbines at a pico scale. Also, CFD methods are getting much closer to real conditions in terms of steady-state with moving references and transient domains with rotor movements. For this purpose, electricity production related to the flow in a PHT was investigated numerically. This study presents six degrees of freedom (6-DOF) and moving reference frame (MRF) methods to predict the maximum conditions of a pico scale two-dimensional turbine by comparing the torque and angular velocities on the runner based on the turbine output power of 1 W determined by an experimental study. Besides, the effect of the torque, angular velocity, tip speed ratio, and turbine body profile was investigated comprehensively. In this regard, MRF and 6-DOF methods were performed to validate and compare the numerical model with the experimental results. Also, the results obtained from 6-DOF and MRF methods were compared to experimental study. It is concluded that PHT is generating 0.3 W power under 6.47 rad/s angular velocity with 6-DOF method, however; this value corresponds to 31.4 rad/s angular velocity against 1 W with the MRF method. Also, the maximum velocity of the turbine was 6.1 m/s according to the simulation result. It is accepted that the turbine maximum velocity inlet was 0.53 m/s based on the experimental study. As a conclusion, numerical results for the pico hydro turbine were reasonable taking the experimental study into account. It is also concluded that there is a tip speed ratio of 2.36 with the MRF method and 0.48 with the 6-DOF method between water tangential velocity and runner velocity for the turbine model.

Anahtar Kelimeler: