Geopolimer harç teknolojisi, yapı sektöründe önem kazanan konulardandır. Çimentonun üretimindeki yüksek enerji maliyeti, yüksek karbondioksit (CO2) salınımı ve üretimindeki zorluklar çimento yerine alternatif bağlayıcılar araştırmayı cazip kılmaktadır. Geopolimer harçlar yüksek fırın cürufu (YFC), uçucu kül (UK) ve silis dumanı (SD) gibi atık ürünlerin bazı alkali ürünlerle aktivasyonu ile elde edilen yeni nesil bağlayıcılardır. Bu çalışmada YFC kullanılarak, farklı oranlarda (%3, %6, %9) sodyum silikat (Na2SiO3) ile alkali aktive edilmiş geopolimer harçlar üretilmiştir. 40*40*160 mm’lik prizma kalıplarda üretilen harçlar uygun kür koşullarında bekletildikten sonra, kılcal su emme, rötre ve basınç dayanımı özellikleri incelenmiştir. Ayrıca sonuçları mukayese edebilmek için Portland Çimentolu (CEM I 42.5 R) kontrol harçları üretilmiştir. Basınç dayanımı açısından cüruflu harçların daha yüksek dayanımlara eriştiği belirlenmiştir. Ancak kılcal su emme ve rötre özellikleri bakımından çimentolu harçların daha olumlu sonuçlar verdiği gözlenmiştir.
Geopolitical tax technology is one of the topics that gain importance in the construction sector. The high energy cost in the production of cement, the high carbon dioxide (CO2) release and the challenges in the production make the research of alternative connectors instead of cement attractive. Geopolymers are the new generation of connectors obtained by the activation of waste products such as high oven curve (YFC), flying ashes (UK) and silic smoke (SD) with some alkaline products. In this study, using YFC, different proportions (%3,%6,%) of sodium silicate (Na2SiO3) produced alkali-activated geopolymers. After the wheels produced in 40*40*160 mm prizma patterns were kept in suitable curve conditions, the key water absorption, rotor and pressure resistance characteristics were studied. It also produced Portland Cement (CEM I 42.5 R) controls to compare the results. It is determined that in terms of pressure resistance, the curved charges reach higher resistance. However, it has been observed that the cemented cuts give more positive results in terms of the absorption and rotating characteristics of key water.
Alan : Fen Bilimleri ve Matematik; Ziraat, Orman ve Su Ürünleri
Dergi Türü : Uluslararası
Benzer Makaleler | Yazar | # |
---|
Makale | Yazar | # |
---|