Bu çalışmada, kompozit kolonların modal davranışları analitik olarak belirlenmiştir. Bu amaçla literatürde ve uygulamada yaygın olarak kullanılan sekiz farklı kesite ve sabit yüksekliğe sahip bir kompozit kolon belirlenerek ANSYS sonlu eleman yazılımında üç boyutlu modeller oluşturulmuştur. Oluşturulan modellerdeki sonlu elaman ağları sonuçlar üzerinde doğrudan etkili olacağından, analizlere başlamadan önce seçilen bir kesit için farklı sonlu eleman ağları oluşturularak serbest titreşim analizleri gerçekleştirilmiş ve ideal olduğu düşünülen bir ağ modeline karar verilmiştir. Benzer eleman sayıları kullanılarak oluşturulan sekiz farklı model analiz edilerek doğal frekansları ve mod şekilleri belirlenmiştir. Elde edilen dinamik karakteristikler birbirleriyle kıyaslanarak tablo ve grafikler halinde sunulmuştur. Farklı kompozit kesitler için gerekli yorumlar yapılmıştır.
In this study, the modal behaviors of the composite columns were analytically determined. For this purpose, a composite column with eight different cuts and a fixed height has been identified, which is widely used in literature and application, and a three-dimensional model has been created in the ANSYS final element software. Since the end-release networks in the created models will have direct impact on the results, the creation of different end-release networks for a selected cutting before the analysis begins, free vibration analyses have been carried out and a network model has been decided to be considered ideal. Analysis of eight different models created using the same number of elements determined the natural frequencies and modes. The achieved dynamic characteristics are presented in tables and graphs compared to each other. There are necessary comments for different composite cuts.
Alan : Mühendislik
Dergi Türü : Ulusal
Benzer Makaleler | Yazar | # |
---|
Makale | Yazar | # |
---|