Amaçlar: Bu çalışmanın amacı, tribokimyasal yüzey işleminin (Tbc) güncel CAD/CAM post materyalleri ile kök kanal dentini arasındaki itme bağlantı dayanımına (İBD) etkisinin değerlendirilmesidir. Gereçler ve Yöntemler: Yeni çekilmiş sağlam 52 adet insan maksiller santral kesici dişleri seçildi ve endodontik olarak tedavi edildi. Dişler, kullanılan post materyaline göre rastgele 7 gruba ayrıldı: Kompozit fiber post (FRC), In Coris TZI (Zr), IPS e.max CAD (Lds), Vita Suprinity (Zls), GC Cerasmart (RMC_Ce), Lava Ultimate (RMC_Lu) ve Vita Enamic (RMC_En). Daha sonra, FRC dışındaki postlar, uygulanan yüzey işlemine göre rastgele iki alt gruba ayrıldı: Kontrol (herhangi bir işlem yok), Tbc (CoJet). Post boşluğunun hazırlanmasından sonra, post örnekler dual-cure kendinden yapışkanlı adeziv rezin siman ile simante edildi. Herbir dişin kökünden 1 mm kalınlığında 3 adet kesit olmak üzere toplam 156 adet kesit elde edildi (n = 12). Her kesit için İBD testi yapıldı ve sonuçlar iki yönlü ANOVA ve Tukey HSD testleri kullanılarak p < 0,05 anlamlılık düzeyinde analiz edildi. Bulgular: En düşük İBD değerleri, yüzey işlemi uygulanmayan (17.24 ± 1.33 MPa) ve tribokimyasal kaplı (23.09 ± 2.16 MPa) Zr grupları için elde edildi (p < 0.05). En yüksek İBD değerleri, yüzey işlemi uygulanmayan RMC_Ce (42.45 ± 2.42 MPa) ve RMC_Lu (45.22 ± 2.32 MPa) grupları (p = 0.215) ve tribokimyasal kaplı RMC_Ce (43.55 ± 2.63 MPa) ve RMC_Lu (45.38 ± 2.59 MPa) grupları için elde edildi (p = 0.821). Kalan post grupları arasında istatistiksel olarak önemli farklılıklar gözlendi (p < 0.05). Tribokimyasal yüzey işlemi, Lds, Zls ve Zr post gruplarının İBD değerlerini önemli ölçüde artırmıştır (p < 0.05). En yaygın olarak Adeziv kırık tipi görüldü (n = 78). Sonuçlar: Bu çalışmanın sonuçları, CAD/CAM RMC post gruplarının İBD değerlerinin FRC, Zr, Lds ve Zls post gruplarından daha yüksek olduğunu ve Tbc'nin tüm CAD/CAM post gruplarının İBD değerlerini artırdığını göstermektedir. Anahtar Kelimeler: CAD-CAM, itme bağlantı dayanımı, post-restorasyon, yüzey işlemi.
Purposes: The aim of this study is to evaluate the effect of tribochemical surface processing (Tbc) on the push connection resistance (IBD) between current CAD/CAM post materials and root channel dentine. Instruments and Methods: Newly drawn solid 52 pieces of human clothes center cutting teeth were selected and endodontically treated. The teeth were randomly divided into 7 groups according to the post material used: Composite Fiber Post (FRC), In Coris TZI (Zr), IPS e.max CAD (Lds), Vita Suprinity (Zls), GC Cerasmart (RMC_Ce), Lava Ultimate (RMC_Lu) and Vita Enamic (RMC_En). Then, the posts outside FRC were randomly divided into two subgroups according to the applicable surface process: Control (no process), Tbc (CoJet). After the post empty was prepared, the post samples were simulated with dual-cure self-lifting adhesive resin siman. A total of 156 cuts (n = 12) were obtained from each tooth root with a thickness of 1 mm of 3 cuts. The IBD test was performed for each cut and the results were analyzed at the p < 0.05 meaning level using the two-way ANOVA and Tukey HSD tests. Results: The lowest IBD values were obtained for the unapplicated surface processing (17.24 ± 1.33 MPa) and tribochemical covered (23.09 ± 2.16 MPa) Zr groups (p < 0.05). The highest IBD values were obtained for the RMC_Ce (42.45 ± 2.42 MPa) and RMC_Lu (45.22 ± 2.32 MPa) groups (p = 0.215) and RMC_Ce (43.55 ± 2.63 MPa) and RMC_Lu (45.38 ± 2.59 MPa) groups covered by tribokemicals (p = 0.821). There were statistically significant differences between the remaining post groups (p < 0.05). The tribochemical surface process has significantly increased the IBD values of Lds, Zls and Zr post groups (p < 0.05). The most commonly seen Adeziv broken type was (n = 78). Results: The results of this study show that the IBD values of the CAD/CAM RMC post groups are higher than the FRC, Zr, Lds and Zls post groups, and that Tbc increases the IBD values of all the CAD/CAM post groups. Keywords: CAD-CAM, push connection resistance, post-restoration, surface processing.
Alan : Sağlık Bilimleri
Dergi Türü : Uluslararası
Benzer Makaleler | Yazar | # |
---|
Makale | Yazar | # |
---|