Kullanım Kılavuzu
Neden sadece 3 sonuç görüntüleyebiliyorum?
Sadece üye olan kurumların ağından bağlandığınız da tüm sonuçları görüntüleyebilirsiniz. Üye olmayan kurumlar için kurum yetkililerinin başvurması durumunda 1 aylık ücretsiz deneme sürümü açmaktayız.
Benim olmayan çok sonuç geliyor?
Birçok kaynakça da atıflar "Soyad, İ" olarak gösterildiği için özellikle Soyad ve isminin baş harfi aynı olan akademisyenlerin atıfları zaman zaman karışabilmektedir. Bu sorun tüm dünyadaki atıf dizinlerinin sıkça karşılaştığı bir sorundur.
Sadece ilgili makaleme yapılan atıfları nasıl görebilirim?
Makalenizin ismini arattıktan sonra detaylar kısmına bastığınız anda seçtiğiniz makaleye yapılan atıfları görebilirsiniz.
 Görüntüleme 13
 İndirme 6
Design of a combined burner based on the patterns of interaction between an external swirling jet and an axial direct-flow jet
2021
Dergi:  
Eastern-European Journal of Enterprise Technologies
Yazar:  
Özet:

The issue of providing fuel and energy resources to the population depends to a large extent on the wear of thermal networks, as well as heat-generating equipment, which, accordingly, forces the consumer to abandon the centralized heating supply in favor of decentralized supply. However, low-power heat-generating units for autonomous consumers do not most of the time operate under the rated mode. The most promising way to solve the issue of energy conservation is to improve the utilization rate of fuel and energy resources in heat-generating units for decentralized heating systems that operate under non-stationary regimes. An experimental study of the velocity field of interaction between the coaxial axial direct-flow and external swirling jets has established that the performance efficiency of a heat-generating plant at a change in the thermal load could be improved by controlling the resulting velocity field. For a more even distribution of temperature within the furnace volume, it has been proposed to supply fuel with an oxidizer in the furnace by the axial direct-flow and swirling coaxial jets. It was revealed that at a distance of 2 diameters of the axial branch pipe from the cut there occurs a transverse toroidal vortex. The appearance of such a vortex is explained by the emergence of low-pressure regions due to the different angles of opening of the swirling outer jet and axial direct-flow jet. The considered dependence of change in the gas flow rate at a decrease in power has demonstrated that the gas flow rate in the proposed burner is less than that in analogs (vortex burner or direct-flow burner) by 10‒15 % when the power of the burner is reduced. At the same time, the specified advantage is limited to the range of the burner's power of 50‒130 kW. The results reported confirm the possibility of controlling the velocity field and temperature distribution when the total fuel and oxidizer flow rate changes within the operational range of low-power heat-generating plants. The correspondence between the temperature field and the velocity field in the interaction of non-isothermal jets has also been shown Author Biographies Oleksandr Klymchuk, Odessa National Polytechnic University Doctor of Technical Sciences, Professor Department of Thermal Power Plants and Energy-saving Technologies

Anahtar Kelimeler:

null
2021
Yazar:  
0
2021
Yazar:  
Atıf Yapanlar
Bilgi: Bu yayına herhangi bir atıf yapılmamıştır.
Benzer Makaleler












Eastern-European Journal of Enterprise Technologies

Alan :   Fen Bilimleri ve Matematik

Dergi Türü :   Uluslararası

Metrikler
Makale : 4.764
Atıf : 4.485
2023 Impact/Etki : 0.294
Eastern-European Journal of Enterprise Technologies