Kullanım Kılavuzu
Neden sadece 3 sonuç görüntüleyebiliyorum?
Sadece üye olan kurumların ağından bağlandığınız da tüm sonuçları görüntüleyebilirsiniz. Üye olmayan kurumlar için kurum yetkililerinin başvurması durumunda 1 aylık ücretsiz deneme sürümü açmaktayız.
Benim olmayan çok sonuç geliyor?
Birçok kaynakça da atıflar "Soyad, İ" olarak gösterildiği için özellikle Soyad ve isminin baş harfi aynı olan akademisyenlerin atıfları zaman zaman karışabilmektedir. Bu sorun tüm dünyadaki atıf dizinlerinin sıkça karşılaştığı bir sorundur.
Sadece ilgili makaleme yapılan atıfları nasıl görebilirim?
Makalenizin ismini arattıktan sonra detaylar kısmına bastığınız anda seçtiğiniz makaleye yapılan atıfları görebilirsiniz.
 Görüntüleme 6
 İndirme 1
Design and analysis of an alkaline fuel cell
2023
Dergi:  
Journal of Thermal Engineering
Yazar:  
Özet:

This study provides a step-by-step, up-to-date fuel cell fundamentals, thermodynamic and electrochemical principles, and system evaluation factors via a case study of a 10-kW alkaline fuel cell designed to operate in space applications. The system also produces 100 kg of pure water and 5.5 kW of heat. The system is modelled using MATLAB and ANSYS Fluent. Then, the model is verified with theoretical and experimental results from the literature. A parametric study of various design and operating parameters, and material selection is carried out to optimize the overall performance. A net output voltage of 0.8 V is obtained at 150 mAcm-2 current density, which yields an overall efficiency of 75%. The results indicate that increasing the electrolyte thickness or operating temperature results in a lower net voltage output. Additionally, improving the performance of a fuel cell through the bipolar plate can be achieved by understanding the contribution of different parameters towards minimizing the pressure drop across the bipolar plate. It is found that implementing an optimized selection of fluid flow rate, channel width, channel depth, number of channels and current density minimize the pressure drop throughout the bipolar plate. Relative humidity has a significant effect on the pressure drop. Results indicate that increasing the relative humidity consequentially rises the pressure drop. Finally, the CFD simulation illustrates that the end-zones in the bipolar plate accumulates fluid due to the nature of stagnation at those locations. Thus, total pressure at those locations is the highest. One of the major contributions here is studying the effect of KOH concentration on the performance of the AFC at different operating temperatures. In addition, a wide range of design and operating parameters were analysed to understand their effect on the overall performance of the fuel cell.

Anahtar Kelimeler:

0
2023
Yazar:  
Atıf Yapanlar
Bilgi: Bu yayına herhangi bir atıf yapılmamıştır.
Benzer Makaleler








Journal of Thermal Engineering

Alan :   Mühendislik

Dergi Türü :   Uluslararası

Metrikler
Makale : 493
Atıf : 243
2023 Impact/Etki : 0.05
Journal of Thermal Engineering