Amaç: Bu çalışmada, prefabrike postların, dişlere yerleştirilmesi esnasında post çapının ve dişin duvar sayısının kırık oluşturma değerlerine etkisinin belirlenmesi amaçlamaktadır.Gereç ve Yöntem: Çalışmaya 100 adet çekilmiş tek kanallı mandibular küçükazı insan dişi dahil edildi. Örnek sayısı 10 olarak belirlenmiş ve toplamda 10 adet grup oluşturulmuştur. Dişlere kök kanal tedavisi yapılıp 1 hafta serum fizyolojik içerisinde bekletildi. A grubunda tüm duvarların kaldırıldığı, B grubunda tek duvarın korunacağı(lingual), C grubunda iki duvarın korunacağı (bukkal ve lingual), D grubunda sadece distal duvarın kaldırıldığı, E grubunda tüm duvarların korunacağı şekilde preparasyon tasarlandı (n =20). Bu grupların alt gruplarında (1 ve 2) (n =10) piezo reamer drillerle çalışmada kullanılacak olan postların kalınlıklarıyla (1-1.25 mm) uyumlu olacak şekilde kök kanal boşluğu genişletildi. Sonrasında örneklere tork kuvveti uygulanmış ve kırık oluşturan kuvvet değerleri istatistiksel olarak analiz edilmiştir. Bulgular: Kırık oluşturan sonuçların ortalamasının en az olduğu grup B-2 (7,71 N), en fazla olan grupsa D-1(13,1 N) olarak belirlendi. Duvar sayısına göre dişlerin kırılma değerleri arasında istatistiksel anlamlı bir farklılık bulunmamıştır (p >0,05), post çapları ile kırık değerleri arasında ise anlamlı bir farklılık bulunmuştur (p <0,05). Sonuç: Post çapının artması kırıkları arttırırken, kalan sağlam diş duvarlarının sayısının hiçbir etkisi olmadı.
Purpose: This study aims to determine the impact of prefabricate posters on the break-creating values of the post diameter and the number of the walls of the tooth during placement on the teeth.Course and Method: The study included 100 single-channel mandibules with a small human female. The number of examples is 10 and a total of 10 groups are formed. The teeth were treated with root canal and kept in the serum for a week. All the walls in group A are removed, the one wall in group B is preserved, the two walls in group C are preserved, the distal walls in group D are removed, and all the walls in group E are preserved (n = 20). In the subgroups of these groups (1 and 2) (n = 10) the root channel gap was expanded to be compatible with the thickness of the posts to be used in the work with piezo reamer drill (1-1.25 mm). Then the tork force was applied to the samples and the strength values that were broken were statistically analyzed. Results: The group B-2 (7.71 N) with the lowest average of the break-through results was determined as D-1 (13.1 N) with the highest number. According to the number of walls, there was no statistically significant difference between the breakdown values of the teeth (p >0,05), and there was a significant difference between the post diameter and the breakdown values (p <0,05). The result: while the increase in the post diameter increased the breaks, the number of remaining solid tooth walls had no effect.
Alan : Sağlık Bilimleri
Dergi Türü : Ulusal
Benzer Makaleler | Yazar | # |
---|
Makale | Yazar | # |
---|