User Guide
Why can I only view 3 results?
You can also view all results when you are connected from the network of member institutions only. For non-member institutions, we are opening a 1-month free trial version if institution officials apply.
So many results that aren't mine?
References in many bibliographies are sometimes referred to as "Surname, I", so the citations of academics whose Surname and initials are the same may occasionally interfere. This problem is often the case with citation indexes all over the world.
How can I see only citations to my article?
After searching the name of your article, you can see the references to the article you selected as soon as you click on the details section.
 Views 14
 Downloands 3
İKİ FARKLI POMZA AGREGASI İÇEREN CAM TOZU KATKILI BETONLARIN FİZİKSEL VE MEKANİK ÖZELLİKLERİNİN İNCELENMESİ
2022
Journal:  
Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi
Author:  
Abstract:

Bu çalışmada, farklı oranlarda bazaltik ve asidik pomza kullanılarak üretilen betonların fiziksel ve mekanik özelliklerini incelenmiştir. Pomza agregaları normal agregadan %50 ve %100 oranında ikame edilmiştir. Ayrıca daha çevreci bir beton üretmek amacıyla atık olan cam tozu çimentodan %10 oranında ikame edilerek 5 farklı karışım üretilmiştir. Üretilen numunelere birim hacim ağırlığı, su emme, porozite, ultrasonik ses geçiş hızı ve basınç dayanımı deneyleri uygulanmıştır. Çalışmanın sonucunda %100 oranında ikame edilen asidik pomza agregası en düşük yoğunluk, ultrasonik ses geçiş hızı ve basınç dayanımı değerleri verirken su emme ve porozite değerleri ise en yüksek çıkmıştır. %100 asidik pomza agregası içeren beton karışımı hariç diğer hafif beton karışımların tamamı TS 2511 standardında belirtilen taşıyıcı hafif betonu basınç dayanımı değerinden (17,2 MPa) daha yüksek basınç dayanım değerleri elde edilmiştir.

Keywords:

Investigation Of Physical and Mechanical Properties Of Glass Powder Additive Concretes Containing Two Different Pumice Aggregates
2022
Author:  
Abstract:

In this study, the physical and mechanical properties of concretes produced using basaltic and acidic pumice at different rates were investigated. Pumice aggregates have been replaced by 50% and 100% of normal-weight aggregates. In addition, in order to produce a more environmentally friendly concrete, 5 different mixtures were produced by replacing waste glass powder from cement at the rate of 10%. Unit volume weight, water absorption, porosity, ultrasonic pulse velocity and compressive strength tests were applied to the produced samples. As a result of the study, while the 100% substituted acidic pumice aggregate gave the lowest density, ultrasonic sound transmission velocity and compressive strength values, the water absorption and porosity values were the highest. Except for the concrete mixture containing 100% acidic pumice aggregate, all of the other lightweight concrete mixtures have higher compressive strength values than the compressive strength value of the structural light-weight concrete (17,2 MPa) specified in the TS 2511 standard.

Keywords:

Citation Owners
Information: There is no ciation to this publication.
Similar Articles












Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi

Field :   Mühendislik; Fen Bilimleri ve Matematik

Journal Type :   Uluslararası

Metrics
Article : 200
Cite : 54
2023 Impact : 0.136
Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi