Kriyojenik işlem malzemelere uygulanan ve malzemelerin tribolojik özelliklerini geliştiren ve geleneksel ısıl işlemi tamamlayıcı veya geleneksel ısıl işleme alternatif ucuz bir ısıl işlemdir. Malzemelere uygulanan kriyojenik işlemin, kalıntı östeniti martenzite dönüştürdüğü, daha homojen mikroyapı sağladığı, aşınma direncini, sertlik ve elektrik iletkenliğinde artış sağladığı bilinmektedir. Bu çalışmada sığ kriyojenik işlemin AISI 410 paslanamaz çeliğin mikroyapısına, sertliğine ve elektrik iletkenliğine etkisi araştırılmıştır. Sığ kriyojenik işlem 4 farklı (24, 48, 72 ve 96 saat) bekleme sürelerinde uygulanarak bekleme süresinin etkisi tespit edilmiştir. İşlem görmemiş numuneler (N0) referans alınarak sonuçlar değerlendirilmiştir. Elde edilen sonuçlara göre sığ kriyojenik işlemin AISI 410 paslanmaz çeliğin mikroyapısını düzenleyerek homojen hale getirdiği gözlemlenmiştir. Sığ kriyojenik işlem N4 numunenin sertliğini, N0 numuneye göre yaklaşık %4 arttırmıştır. Ayrıca elektrik iletkenliğinde %300 artış sağlanmıştır. Sertlik ve elektrik iletkenliğine en fazla etki 96 saat bekleme süresinde elde edilmiştir. Genel olarak sığ kriyojenik işlemin, uygun bekleme süresinde, paslanmaz çeliğin sertlik ve elektrik iletkenliğine olumlu etkiye sahip olduğu görülmüştür.
Cryogenic processing is a cheap thermal processing that applies to materials and develops the tribolological characteristics of materials and complements traditional thermal processing or alternative traditional thermal processing. It is known that the cryogenic process applied to materials transforms the remaining esthenite into martensite, provides a more homogeneous microbuilding, increases the resistance to stretching, hardness and electrical conductivity. This study has studied the impact of thick cryogenic process on the microbuilding, hardness and electrical conductivity of the AISI 410. The impact of the waiting time was identified by applying a thick cryogenic process in 4 different waiting times (24, 48, 72 and 96 hours). Unprocessed samples (N0) have been evaluated by reference. According to the results obtained, the thick cryogenic process has been observed to be homogeneous by regulating the microbuilding of stainless steel AISI 410. The thick cryogenic process increased the hardness of the N4 sample by about 4% compared to the N0 sample. There is also a 300% increase in electricity. The maximum impact on hardness and electrical conductivity was achieved in 96 hours of waiting time. In general, the thick cryogenic process has been shown to have a positive effect on the hardness and electrical conductivity of stainless steel during the appropriate waiting period.
Alan : Fen Bilimleri ve Matematik
Dergi Türü : Ulusal
Benzer Makaleler | Yazar | # |
---|
Makale | Yazar | # |
---|