Kullanım Kılavuzu
Neden sadece 3 sonuç görüntüleyebiliyorum?
Sadece üye olan kurumların ağından bağlandığınız da tüm sonuçları görüntüleyebilirsiniz. Üye olmayan kurumlar için kurum yetkililerinin başvurması durumunda 1 aylık ücretsiz deneme sürümü açmaktayız.
Benim olmayan çok sonuç geliyor?
Birçok kaynakça da atıflar "Soyad, İ" olarak gösterildiği için özellikle Soyad ve isminin baş harfi aynı olan akademisyenlerin atıfları zaman zaman karışabilmektedir. Bu sorun tüm dünyadaki atıf dizinlerinin sıkça karşılaştığı bir sorundur.
Sadece ilgili makaleme yapılan atıfları nasıl görebilirim?
Makalenizin ismini arattıktan sonra detaylar kısmına bastığınız anda seçtiğiniz makaleye yapılan atıfları görebilirsiniz.
 Görüntüleme 11
İnce Cidarlı Kompozit Kiriş Olarak Modellenmiş Uçak Kanatlarının Eğilme-Eğilme Bağlaşım Titreşiminin Aktif Kontrolü
2019
Dergi:  
Avrupa Bilim ve Teknoloji Dergisi
Yazar:  
Özet:

Aktif titreşim kontrol metotlarının geliştirilmesi ve uygulanması günümüzde hava uzay yapılarının performans gerekliliklerini sağlamak ve verimliliklerini iyileştirmek açısından oldukça önemli bir konu haline gelmiştir. Bu ilginin en büyük sebebi bu tarz malzemelerin havacılık ve uzay, otomotiv, helikopter ve turbo makinelerin palleri ve robot kolları gibi çeşitli farklı yapılara kolayca uyarlanabilmesi ve kullanılabilir durumda olmasından kaynaklanmaktadır. Akıllı veya uyarlanabilir malzemelerin kullanımı ile, yapıların dinamik karakteristiklerinin öngörülebilir bir şekilde kontrol edilmesi mümkündür. Buna ek olarak, yapısal rezonans ya da çırpınma gibi dinamik kararsızlıkların da önüne geçilebilir. Yapılmış olan bu çalışmada, elmas kesitli uyarlanabilir bir uçak kanadının piezoelektrik malzemeler yardımıyla aktif titreşim kontrolü incelenmiştir. Uçak kanadı ince cidarlı bir kompozit kiriş olarak modellenmiş ve piezoeyleyiciler ve algılayıcılar yapının içine çift olarak çalışmaları için gömülmüştür. Gömülmüş olan bu piezoelektrik malzemeler, tüm kiriş boyunca uzanmaktadırlar ve bu sayede sınır moment kontrol yöntemini geçerli kılmışlardır. Kapalı devre aktif titreşim kontrolü kayma etkilerinin de dahil olduğu enine ve yanal eğilme bağlaşımı gösteren uçak kanadına uygulanmıştır. Oransal geri besleme ve hız geri besleme kontrol yasaları olmak üzere iki farklı kontrol yasası kullanılmıştır. Serbest titreşim problemi Extended Galerkin Yöntemi ile çözülmüş, çeşitli geometrik ve malzeme ile alakalı kalınlık oranı, açıklık oranı ve elyaf açıları gibi parametrelerin doğal frekanslar üzerindeki etkisi incelenmiştir. Elde edilen sonuçlar ışığında, parametrelerin değişimi ile birlikte kompozit uçak kanatlarının tasarımı için bilgiler elde edilmiştir. Hız geri besleme yasası, oransal geri besleme yasasına göre doğal frekanslar üzerinde daha fazla kontrol sağlaması nedeniyle daha elverişli bulunmuştur. Ayrıca hız geri besleme yasası sisteme suni yapısal sönümleme kattığından dolayı hava uzay yapılarında dinamik ya da aeroelastik kararsızlıklar doğurabilecek tehlikeleri engelleme potansiyeline sahiptir.

Anahtar Kelimeler:

Active control of the vibration of the curvation-curvation connection of the modeled aircraft wings as a thin-cider composite input
2019
Yazar:  
Özet:

The development and implementation of active vibration control methods has become a very important topic today in terms of ensuring the performance requirements of air space structures and improving their efficiency. The main reason for this interest is that these types of materials are easily adapted and available to various structures, such as air and space, automotive, helicopter and turbo machines and robot arms. With the use of smart or adjustable materials, it is possible to predictablely control the dynamic characteristics of structures. In addition, dynamic instabilities such as structural resonance or scratching can also be prevented. In this study, the active vibration control was studied with the help of piezoelectric materials of an adjustable aircraft wing with diamond cut. The aircraft wing is modeled as a thin-cidered composite curve and the piezoeys and detectors are buried in the structure for their work as a pair. These embedded piezoelectric materials are stretched throughout the curve and thus have made the limit moment control method applicable. The closed circuit is applied to the aircraft wing that indicates a side-wing connection, including the active vibration control of the swing effects. Two different control laws have been used, the Oransal Restoration and the Speed Restoration Control Act. Free vibration problem solved by Extended Galerkin Method, the effect of parameters on natural frequencies, such as geometric and material-related thickness ratio, transparency ratio and fiber angles, has been studied. In light of the achieved results, the information for the design of the composite aircraft wings was obtained along with the change of parameters. The law of speed-return has been found more convenient because it provides more control over natural frequencies according to the law of proportional-return. Also, because the speed refueling law adds artificial structural degradation to the system, it has the potential to prevent dangers that can cause dynamic or aeroelastic instability in space structures.

Anahtar Kelimeler:

Active Control Of Bending-bending Coupled Vibration Of Aircraft Wings Modeled As Thin-walled Composite Beams
2019
Yazar:  
Özet:

The development and implementation of active vibration control methods have attracted considerable attention in the recent years due to enhanced efficiency and performance requirements in aerospace structures. Using adaptive materials, the dynamic characteristics of structures could be controlled in a predictable manner to prevent dynamic instabilities such as structural resonance. This study presents the active vibration control of a diamond-shaped adaptive aircraft wing by using piezoelectric actuation. The aircraft wing is modeled as a thin-walled composite beam in which the piezoactuator/sensors are embedded into the structure to serve as couples. The piezoactuators/sensor are spread over the entire span to benefit from the bending moment control. The closed loop active vibration control is performed for the aircraft wing featuring the coupled motion of transverse and lateral bending including shear effects. Two different control laws, namely proportional feedback control law and velocity feedback control law are employed. The free vibration problem is solved by the Extended Galerkin Method (EGM) and the effects of several geometrical and material aspects such as thickness and aspect ratios, and ply angle on the natural frequencies are investigated. The obtained results with the variations of such parameters provide guidelines for the design of thin-walled composite aircraft wings. Through comparison the velocity feedback control law is found to be superior to the proportional feedback control law as it provides better controllability of natural frequencies. Furthermore, the velocity feedback law also introduces artifical structural damping, hence providing a capability of suppressing the oscillations which may cause dynamic/aeroelastic instabilities in aerospace structures.

Anahtar Kelimeler:

Atıf Yapanlar
Bilgi: Bu yayına herhangi bir atıf yapılmamıştır.
Benzer Makaleler










Avrupa Bilim ve Teknoloji Dergisi

Alan :   Fen Bilimleri ve Matematik; Mühendislik

Dergi Türü :   Uluslararası

Metrikler
Makale : 3.175
Atıf : 5.495
2023 Impact/Etki : 0.178
Avrupa Bilim ve Teknoloji Dergisi