Özet:

: The reuse of waste materials for water treatment purposes is an important approach for promoting the circular economy and achieving effective environmental remediation. This study examined the use of bone char/titanium dioxide nanoparticles (BC/nTiO 2) composite and UV for As(III) and As(V) removal from water. The composite was produced via two ways: addition of nTiO 2 to bone char during and after pyrolysis. In comparison to the uncoated bone char pyrolyzed at 900 °C (BC900), nTiO 2 deposition onto bone char led to a decrease in the specific surface area and pore volume from 69 to 38 m 2/g and 0.23 to 0.16 cm 3/g, respectively. However, the pore size slightly increased from 14 to 17 nm upon the addition of nTiO 2. The composite prepared during pyrolysis (BC/nTiO 2) P had better As removal than that prepared after pyrolysis with the aid of ultrasound (BC/nTiO 2) US (57.3% vs. 24.8%). The composite (BC/nTiO 2) P had higher arsenate oxidation than (BC/nTiO 2) US by about 3.5 times. Arsenite oxidation and consequent adsorption with UV power of 4, 8 and 12 W was examined and benchmarked against the composite with visible light and BC alone. The highest UV power was found to be the most effective treatment with adsorption capacity of 281 µg/g followed by BC alone (196 µg/g). This suggests that the effect of surface area and pore volume loss due to nTiO 2 deposition can only be compensated by applying a high level of UV power.

Anahtar Kelimeler: