Bu çalışma kapsamında, farklı oranlarda Zn ve Mg içeren 5 adet ticari Al döküm alaşımının mikroyapısal özellikleri ve sertlik değerleri incelenmiştir. Alaşımlara üretildikten sonra 500°C sıcaklıkta 1 saat süre ile çözeltiye alma işlemi uygulanmış sonrasında 200°C sıcaklıkta 1, 4 ve 16 saat boyunca yaşlandırma ısıl işlemine maruz bırakılmıştır. Mevcut fazların miktarı, dağılımı, büyüklüğü ve morfolojisi gibi mikroyapısal özellikler alaşımların bileşimine ve yaşlandırma işlemi süresine göre pek fazla değişmemiştir. Sadece 16 saat yaşlandırma sonucu mikroyapıda aşırı yaşlandırmaya bağlı irileşme gözlemlenmiştir. İncelenen tüm alaşımların sertlik değerleri yaşlandırma sonucu önemli ölçüde artmış olup tüm alaşımlar pik (en yüksek) sertlik değerlerine 4 saat yaşlandırma süresinde ulaşmışlardır.
In this study, the micro-structure characteristics and hardness values of the 5 commercial Al casting alloys containing Zn and Mg in different proportions have been studied. After the alloys were produced, the solution process was applied for 1 hour at a temperature of 500°C and then the ageing thermal process was exposed for 1, 4 and 16 hours at a temperature of 200°C. Microbuilding properties such as the amount, distribution, size and morphology of the existing phases have not changed much according to the composition of the alloys and the time of the aging process. Only 16 hours of aging resulted in an irritation associated with over-ageing in the microbuilding. The hardness values of all the alloys reviewed have increased significantly as a result of aging, and all the alloys have reached the highest (highest) hardness values within 4 hours of aging.
Alan : Fen Bilimleri ve Matematik; Sağlık Bilimleri; Ziraat, Orman ve Su Ürünleri
Dergi Türü : Ulusal
Benzer Makaleler | Yazar | # |
---|
Makale | Yazar | # |
---|