Ülkemizde bina yalıtımında EPS ve XPS ısı yalıtım levhaları halen yaygın olarak kullanılmaktadır. Ancak, bu malzemelerin düşük yangın dirençleri nedeniyle son yıllarda yüksek katlı binalarda kullanımı sınırlandırılmıştır. Bu tür yapılarda camyünü-taşyünü levhalar ve ısı yalıtım sıvaları gibi A sınıfı yangın dayanımına sahip malzemelerin kullanımı mümkündür. Ancak camyünü – taşyünü levhalarda su emme ve yüksek birim maliyetler önemli sorunlardır. Türkiye’de “ısı yalıtım sıvası” adı altında çok farklı marka ve türde ürün mevcuttur. Bu ürünlerin ısı iletkenlik açısından sorunlu olduğu da bilinmektedir. Bu çalışmada, yüksek performanslı, ekonomik ve kolay uygulanabilen farklı bir ürünün geliştirilmesi amaçlanmıştır. Köpük sıvada bağlayıcı olarak Portland çimentosu ve kireç, hafif agrega olarak genleştirilmiş perlit, kaplı perlit, cam küre ya da diyatomit kullanılmıştır. Köpük yoğunluğu 85 g/L dir. Tüm karışımlarda s/b oranı (0.5) sabittir. Üretilen numuneler üzerinde birim hacim kütle, basınç ve eğilme dayanımları, kılcal su emme, ısıl iletkenlik deneyleri yürütülmüştür. Köpük sıva numunelerinin kuru yoğunlukları 250 kg/m3, 28 günde basınç dayanımları 250 kPa, kılcal su emme katsayıları 0.4 kg/m2.dak ve ısıl iletkenlik katsayıları 0.065 W/mK dir. Köpük sıva numunelerin birim maliyetleri geleneksel ısı yalıtım malzemelerinden 1.5-3.5 kat daha düşüktür. Sonuç olarak bu çalışma çimento esaslı köpük sıvanın büyük ölçüde geleneksel ısı yalıtım malzemelerine alternatif olabileceğini ortaya koymuştur.
In our country, the EPS and XPS thermal insulation sheets are still widely used in building insulation. However, the use of these materials has been limited in high-storey buildings in recent years due to low fire resistance. In such structures, it is possible to use materials with A-class fire-resistance, such as camouflage leaves and heat-isolation slides. But the water absorption in the sheets of the mosquito - the stone and the high unit costs are major problems. In Turkey, there are many different brands and types of products available under the name of "heat isolation liquid". It is also known that these products are problematic in terms of thermal conductivity. This study aims to develop a different product that is high performance, economical and easy to apply. Portland cement and clay are used as binding in the butterfly fluid, perlit, covered perlit, glass curve or diathomite, enlarged as a light agrega. The bulb intensity is 85 g/l. The s/b ratio is fixed (0.5) in all mixture. Unity volume mass, pressure and inclination resistance, key water absorption, heat conductivity experiments have been conducted on the produced samples. The dry intensity of the bubble steam samples is 250 kg/m3, the pressure resistance is 250 kPa in 28 days, the water absorption rates are
EPS and XPS thermal insulation boards are still widely used in building insulation in Turkey. However, the implementation of these materials has not allowed in recent years due to low fire resistance in high-rise buildings. It is possible to use materials of Class A fire resistance such as glass wool-stone wool sheets and thermal insulation plasters in such buildings. However, the significant problems encountered in glass wool - rock wool sheets are high water absorption and high unit costs. Many different brands and types of product which is defined as thermal insulation plaster are present in Turkey. However, it is a known fact that most of these products are problematic especially in terms of thermal conductivity. The aim of this study is to develop a new product with high performance, economical and easy application. Portland cement and lime as binder and, expanded perlite, coated perlite, sphere glass and diatomite as lightweight aggregate were used as binders in foam plaster mixtures. The density of the foam is 85 g/L. The water/binder ratio (0.5) was kept constant in all mixtures. Fresh and dry densities, compressive and flexural strengths, capillary water absorption and thermal conductivity tests were carried out on the specimens. Foam plaster specimens have a dry density of 250 kg/m3, a compressive strength of 250 kPa at 28 days, a capillary water absorption of 0.4 kg/m2 and a thermal conductivity of 0.065 W/mK. The unit costs of foam plasters are 1.5-3.5 times lower than conventional thermal insulation materials. As a result, the study showed that cement based foam plaster can be an alternative to traditional thermal insulation materials.
Alan : Mimarlık, Planlama ve Tasarım; Mühendislik
Dergi Türü : Uluslararası
Benzer Makaleler | Yazar | # |
---|
Makale | Yazar | # |
---|