MEMS ve NEMS cihazlarının, gittikçe küçülen yapılarıyla beraber kararlı ve verimli çalışabilmesi için tasarımları önem kazanmaktadır. Sınır elemanları yöntemi bu tür cihazların tasarımı için son zamanlarda yaygın olarak kullanılan bir yöntemdir. Bu çalışmada, klasik yöntemler olarak ifade edilen sonlu farklar yöntemi ve sonlu elemanlar yöntemine göre daha yeni bir metot olan sınır elemanları metodu araştırılmıştır. Sınır elemanları yönteminin MEMS tasarımındaki performansını incelemek için MEMS plakası dışında oluşan skaler manyetik potansiyel analiz edilmiştir. İlk olarak problem bölgesi sınırları, sabit sınır elemanı ile bölümlenmiş ve Dirichlet sınır şartları tanımlanarak problem modellenmiştir. Problemi çözmek için Matlab ortamında yeni bir program geliştirilmiştir. Tasarlanan program, limitleri ve eleman sayıları belirlenen iki boyutlu problem bölgesinde, otomatik olarak sonlu elemanlar yöntemi ve sınır elamanları yöntemi için çözüm yapmaktadır. Sonuçların doğruluk derecesini kontrol etmek için problem analitik olarak çözülerek tüm sonuçlar karşılaştırılmıştır. Uygulamada elde edilen sonuçlara göre sınır elemanları yönteminin sonlu elemanlar yöntemine göre problem çözmek için gerekli veriler, uygulama kolaylığı ve sonuçların doğruluğu açısından birçok pozitif yöne sahip olduğu ifade edilebilir. Bu çalışmada elde edilen sonuçlara göre MEMS ve NEMS cihazların elektrostatik ve manyetostatik algılama mesafeleri tespitinde sınır elamanları metodunun kullanılması önerilebilir. Geliştirilen yeni program, bu tür cihazların daha iyi bir tasarıma sahip olmalarına katkı sunabilir.
The designs of the MEMS and NEMS devices are increasingly important to ensure that they can work stable and efficiently with their increasingly minimized structures. The border elements method is a method that is widely used recently for the design of such devices. In this study, the method of final differences expressed as classic methods and the method of limit elements, which is a new method compared to the method of final elements, were studied. The scale magnetic potential formed outside the MEMS plate has been analyzed to study the performance of the border elements method in the MEMS design. First, the problem area boundaries were divided by the fixed border element and the problem modeled by defining the Dirichlet border conditions. A new program has been developed in the Matlab environment to solve the problem. The designed program, in the two-dimensional problem area determined by the limits and the number of elements, automatically makes solutions to the final elements method and the limit elamanes method. To verify the accuracy of the results, the problem is analytically solved and all the results are compared. According to the results obtained in the application, it can be stated that the limit elements method has many positive directions in terms of the data needed to solve the problem according to the final elements method, the ease of application and the accuracy of the results. According to the results obtained in this study, it is recommended that the method of the border elamanes be used in the detection of the electrostatic and magnetostatic detection distances of MEMS and NEMS devices. The new program developed can contribute to the better design of such devices.
Designs of MEMS and NEMS devices are gaining importance for their stable and efficient operation with their shrinking structures. Boundary element method is a widely used method for design of such devices, recently. In this study, finite difference method, which is expressed as classical methods, and boundary element method, which is a newer method compared to finite element method, was investigated. To examine the performance of boundary element method in MEMS design, the scalar magnetic potential formed outside the MEMS plate was analyzed. Firstly, the boundaries of problem region are divided with a fixed boundary element and the problem is modeled by defining Dirichlet boundary conditions. A new program has been developed in Matlab environment to solve the problem. The designed program automatically solves the finite element method and the boundary element method in two-dimensional problem region whose limits and number of elements are determined. To check the accuracy of the results, the problem was solved analytically and all results were compared. According to the results obtained in the application, it can be stated that boundary element method has many positive aspects in terms of the data required for problem solving, the ease of application and the accuracy of the results according to the finite element method. According to the results obtained in this study, it may be suggested to use the boundary element method in detection of electrostatic and magnetostatic sensing distances of MEMS and NEMS devices. The developed program can contribute to better design of such devices.
Alan : Fen Bilimleri ve Matematik; Mühendislik
Dergi Türü : Ulusal
Benzer Makaleler | Yazar | # |
---|
Makale | Yazar | # |
---|