Özet:

The object of the study in this work is pressure spikes in the accumulator tank of the xenon feed system for electric propulsion. The presence of significant pressure spikes in the accumulator tank of the feed system causes a change in the mass flow and, accordingly, a significant deterioration of the thruster parameters - thrust, specific impulse and efficiency. The problem that was solved in this work is to find ways to reduce pressure spikes while minimizing the volume of the accumulator tank without using additional elements. The analysis of literary sources showed that the specified problem is typical and has not been solved for small-volume accumulator tanks yet. To solve this problem, theoretical and experimental determination of pressure spikes that occur during the work on feedback from sensors was carried out, and an improved method of filling the accumulator tank was proposed. As a result of research, it was determined that pressure spikes that go beyond the permissible range (±3 %) appear at an inlet pressure of 3.5 MPa. With an increase of inlet pressure, the pressure spikes also increase. As a result of research, it was found that for an inlet pressure of up to 3 MPa, it is appropriate to work on feedback from pressure sensors. For pressure values from 3 to 6 MPa, it is necessary to use the experimentally obtained formula to determine the accumulator tank filling time. For a pressure of more than 6 MPa, it is necessary to work in the bang-bang mode. The research made it possible to determine the optimal modes of filling the accumulator tank. Presented modes allow to use a small-volume accumulator tank with the minimization of the valve activations number, in which stable operation of the thruster is maintained. The conclusions obtained as a result of the research can be useful for most developers of feed systems for electric propulsion Author Biographies Bohdan Yurkov, Oles Honchar Dnipro National University Postgraduate Student Department of Engine Construction

Anahtar Kelimeler: