Sabit yataklı kolonda sürekli adsorpsiyon çalışması, metilen mavisinin (MM) sulu çözeltiden giderilmesi için adsorbent olarak şeftali çekirdeği kabuğu kullanılarak gerçekleştirildi. Adsorpsiyon özellikleri üzerine başlangıç MM konsantrasyonu (20-60 mg/L), akış hızı (5-10 mL/dk) ve adsorbent miktarının (1.5-2.5 g) etkisi incelendi. Elde edilen veriler, breakthrough eğrilerinin akış hızına, başlangıç boya konsantrasyonuna ve adsorbent miktarına bağlı olduğunu doğruladı. Thomas, Yoon-Nelson ve Adams-Bohart kinetik modelleri breakthrough eğrilerini tahmin etmek ve proses tasarımında faydalı olan kolonun karakteristik parametrelerini belirlemek için deneysel verilere uygulandı. Yanlızca Adams-Bohart modeli dinamik prosesin başlangıç kısmını tahmin etmek için uygun bulundu.
Continuous adsorption work in the fixed bed column was carried out by using peanut grain leather as an adsorbent to remove methylene blue (MM) from the water solution. The effect of the initial MM concentration (20-60 mg/L), flow speed (5-10 mL/min) and the amount of adsorbent (1.5-2.5 g) on the adsorption properties was studied. The obtained data confirmed that breakthrough curves depend on the flow speed, the starting paint concentration and the amount of adsorbent. Thomas, Yoon-Nelson and Adams-Bohart kinetic models were applied to experimental data to predict breakthrough curves and to determine the characteristic parameters of the column, which is useful in the process design. Only the Adams-Bohart model was found suitable to predict the beginning of the dynamic process.
Alan : Fen Bilimleri ve Matematik; Mühendislik
Dergi Türü : Ulusal
Benzer Makaleler | Yazar | # |
---|
Makale | Yazar | # |
---|