Bu çalışmada, Al66Co20Cu14 alaşımı elementel tozlarından mekanik alaşımlama yöntemi ile üretilmiştir. Farklı öğütme aşamalarında mekaniksel olarak üretilen alaşımın mikroyapısal değişiklikleri ve termal davranışları, diferansiyel termal analiz (DTA), X-ışını kırınımı (XRD) ve taramalı elektron mikroskobu (SEM) enerji yayılımlı X-ışını analizi (EDX) kombinasyonu ile araştırılmıştır. XRD sonuçları Al2Cu, Al13Co4 gibi yeni intermetalik fazların oluşumunu göstermiştir. Öğütme süresine bağlı olarak tane büyüklüğü kırılma ve deformasyon sonucu küçülerek 25.2 nm olarak ölçülmüştür. 100 saatlik öğütme ile üretilen numune için faz geçiş aktivasyon enerjileri hesaplandı ve sonuçlar üretilen alaşımın termal kararlılığa sahip olduğunu göstermiştir. Ayrıca numunelerim mikroyapısı ve toz bileşenlerin alaşım içerisindeki dağılım durumu SEM/EDX ile araştırılmıştır. XRD ve SEM/EDX sonuçları öğütme süresi arttıkça tane boyutunda küçülme ve daha homojen bir yapı oluştuğunu göstermiştir
In this study, the Al66Co20Cu14 alloy was produced by the mechanical alloy method from elementary powder. The micro-structure changes and thermal behaviors of the mechanically produced alloy in the different polishing stages have been studied by a combination of differential thermal analysis (DTA), X-ray breakdown (XRD) and scaned electron microscope (SEM) energy spread X-ray analysis (EDX). The XRD results showed the formation of new intermetal phases such as Al2Cu, Al13Co4. Depending on the duration of wraping, the size of the one is measured to 25.2 nm, reduced as a result of breakdown and deformation. The phase transition activation energies were calculated for the sample produced with 100 hours of moisture and the results showed that the produced alloy has thermal stability. My samples have also been studied in the microbuilding and powder components’ allocation status within the alloy with SEM/EDX. The XRD and SEM/EDX results showed that the length of the length of the length of the length of the length of the length of the length of the length of the length of the length of the length of the length of the length of the length of the length of the length of the length of the length of the length of the length.
Alan : Fen Bilimleri ve Matematik; Mühendislik
Dergi Türü : Ulusal
Benzer Makaleler | Yazar | # |
---|
Makale | Yazar | # |
---|