Son yıllarda elektronik devrelerin üretim yoğunluğunun artması ile elektrik devrelerinin mikron mertebesinde küçültülmesine ihtiyaç duyulmuştur. Bu küçüklükteki bir elektronik devrenin çok yüksek bir performansa sahip olması gerekir. Dielektrik sabiti değeri yüksek olduğu bilinen BaTiO3(1200-1250 F\m) yalıtkanlığı yüksek epoksi reçine ile güçlendirilirse kapasitörlerde kullanım alanı bulacak dielektrik sabiti çok yüksek aynı zamanda dielektrik kayıbı çok düşük olan bir malzeme üretilebilir. Bunun için öncelikle BaTiO3 tozu geleneksel toz hazırlama yöntemlerine göre hazırlanır, daha sonra ağırlıkça %72, %70 ve %68 oranlarında BaTiO3, 1:2 ve 1:4 epoksi-sertleştirici oranına sahip reçinelerle birleştirilip kompozit malzeme olarak üretilir. Neticede dielektrik kayıbı düşük olan plakalarla elektrik kaçağını minimum düzeye indirecek homojen ürünler elde edilmiştir.
In recent years, the increase in the production intensity of electronic circuits has led to the need to minimize the electric circuits in the micron staircase. This small electronic circuit must have a very high performance. BaTiO3(1200-1250 F\m) is known to have a high dielectric stability value, if the isolation is strengthened by high epoxy rhinus, the dielectric stability that will find the area of use in the containers is very high and the dielectric loss is very low, a material can be produced. For this purpose, BaTiO3 powder is first prepared according to the traditional powder preparation methods, then combined with refines with epoxy-harding rates of BaTiO3, 1:2 and 1:4 in weight 72, 70% and 68% and produced as a composite material. Finally, homogeneous products have been obtained with low dielectrial loss plates that will reduce electricity leak to a minimum level.
Alan : Fen Bilimleri ve Matematik; Mühendislik
Dergi Türü : Ulusal
Benzer Makaleler | Yazar | # |
---|
Makale | Yazar | # |
---|