Kullanım Kılavuzu
Neden sadece 3 sonuç görüntüleyebiliyorum?
Sadece üye olan kurumların ağından bağlandığınız da tüm sonuçları görüntüleyebilirsiniz. Üye olmayan kurumlar için kurum yetkililerinin başvurması durumunda 1 aylık ücretsiz deneme sürümü açmaktayız.
Benim olmayan çok sonuç geliyor?
Birçok kaynakça da atıflar "Soyad, İ" olarak gösterildiği için özellikle Soyad ve isminin baş harfi aynı olan akademisyenlerin atıfları zaman zaman karışabilmektedir. Bu sorun tüm dünyadaki atıf dizinlerinin sıkça karşılaştığı bir sorundur.
Sadece ilgili makaleme yapılan atıfları nasıl görebilirim?
Makalenizin ismini arattıktan sonra detaylar kısmına bastığınız anda seçtiğiniz makaleye yapılan atıfları görebilirsiniz.
 Görüntüleme 12
 İndirme 3
Klorheksidin uygulamasının bulk-fill ve nanofil kompozitlerin tamir bağlanma dayanımı üzerine etkisi
2018
Dergi:  
Selcuk Dental Journal
Yazar:  
Özet:

Amaç: Bu çalışmanın amacı klorheksidin uygulamasının nanofil ve bulk-fill kompozitlerin tamir bağlanma dayanımı üzerine etkisini değerlendirmektir Gereç ve Yöntemler: Çalışmamızda kullanılmak üzere oluşturulan akrilik bloklar üzerinde 160 adet kavite hazırlandı. Kavitelerin yarısı nanofil kompozitlerle (Filtek Ultimate) doldurulurken yarısı da bulk-fill kompozitlerle (Tetric EvoCeram Bulkfill) dolduruldu. Bütün örnekler 1 hafta 37ºC distile suda bekletildikten sonra her restoratif materyalin örnekleri başlıca 2 deney grubuna ayrıldı. Grup 1’de örnekler 60 saniye klorheksidin uygulamasına maruz bırakıldı. Grup 2’deki örneklere ise bir uygulama yapılmadı (kontrol). Restoratif materyallerin uygun adezivleri her iki grupta ara tamir ajanı olarak uygulandı. Her gruptan örneklerin yarısı test öncesi termal siklusa ( 5000 siklus, 5-55 ºC, kalma süresi 30 saniye, transfer zamanı 15 saniye) maruz bırakıldı, diğer yarısı hemen teste alınarak tamir bağlanma dayanımı makaslama testi ile değerlendirildi. Deney gruplarının makaslama bağlanma dayanımı analiz etmek için çift yönlü ANOVA testi kullanıldı. Önemlilik seviyesi (p<0.05) alındı. Bağlanma dayanımı testi sonrasında oluşan kırık tipleri optik loop ile incelendi ve gruplara ayrıldı. Kırık tipleri ayrıca Taramalı Elektron Mikroskobu ile görüntülendi. Bulgular:  Klorheksidin ve termal siklus uygulaması tamir bağlanma dayanımını anlamlı bir şekilde etkilememiştir (p>0.05). Bulk-fill kompozitler daha düşük tamir bağlanma dayanımı göstermiştir. En yüksek bağlanma değeri Nanofil kompozitlerle 24 saat sonra kontrol grubunda  elde edilirkendüşük değer klorheksidin uygulaması sonrası termal siklus yapılan Bulk-fill kompozitlerde bulunmuştur. Mix tip kırılmalarfazla rastlanan tip kırılmalar olmuştur. Sonuçlar: Bu in vitro çalışmanın sınırları içinde klorheksidin ve ek olarak uygulanan termal siklus ile yaşlandırma metodu bulk-fill ve nanofil bazlı kompozitlerin tamir bağlanma dayanımını etkilememiştir.

Anahtar Kelimeler:

The effect of the application of chlorhexidine on the repair binding resistance of bulk-fill and nanofil composites
2018
Yazar:  
Özet:

Purpose: The purpose of this study is to evaluate the impact of the application of chlorhexide on the repair binding resistance of nanophiles and bulk-fill composites Tools and Methods: 160 pieces of covers on the acrylic blocks created for use in our study were prepared. Half of the boxes were filled with nanophilic compounds (Filtek Ultimate), while half were filled with bulk-fill compounds (Tetric EvoCeram Bulkfill). After all the samples were kept in distilled water for 1 week at 37oC, the samples of each restorative material were divided into 2 main trial groups. Examples in Group 1 were exposed to chlorhexidine for 60 seconds. Examples in Group 2 have not been applied (control). The proper adhesives of restorative materials were applied as interim repair agents in both groups. Half of the samples from each group were exposed to the pre-test thermal cycle (5000 cycles, 5-55 oC, stay time 30 seconds, transfer time 15 seconds), the other half was assessed by the repair binding resistance scanning test by taking the test immediately. The experimental groups used a two-way ANOVA test to analyze the scattering connection resistance. The level of importance (p<0.05) has been taken. The broken types formed after the connection resistance test were examined with an optical loop and divided into groups. The broken types were also displayed with a scaned electron microscope. The findings: the application of chlorhexidine and thermal cycle has not significantly affected the repair binding resistance (p>0.05). Bulk-fill compounds showed lower repair binding resistance. The highest bond value is obtained in the control group after 24 hours with nanophyllic compounds.Low value is found in bulk-fill compounds made in the thermal cycle after the application of chlorhexidine. The mixed type of fractures has been found. Results: This in vitro study has not affected the repair bonding resistance of the bulk-fill and nanofil-based compounds with chlorhexidine and the thermal cycle applied in addition.

Anahtar Kelimeler:

Atıf Yapanlar
Bilgi: Bu yayına herhangi bir atıf yapılmamıştır.
Benzer Makaleler








Selcuk Dental Journal

Alan :   Sağlık Bilimleri

Dergi Türü :   Ulusal

Metrikler
Makale : 699
Atıf : 254
Selcuk Dental Journal