Kullanım Kılavuzu
Neden sadece 3 sonuç görüntüleyebiliyorum?
Sadece üye olan kurumların ağından bağlandığınız da tüm sonuçları görüntüleyebilirsiniz. Üye olmayan kurumlar için kurum yetkililerinin başvurması durumunda 1 aylık ücretsiz deneme sürümü açmaktayız.
Benim olmayan çok sonuç geliyor?
Birçok kaynakça da atıflar "Soyad, İ" olarak gösterildiği için özellikle Soyad ve isminin baş harfi aynı olan akademisyenlerin atıfları zaman zaman karışabilmektedir. Bu sorun tüm dünyadaki atıf dizinlerinin sıkça karşılaştığı bir sorundur.
Sadece ilgili makaleme yapılan atıfları nasıl görebilirim?
Makalenizin ismini arattıktan sonra detaylar kısmına bastığınız anda seçtiğiniz makaleye yapılan atıfları görebilirsiniz.
 Görüntüleme 12
 İndirme 1
Calibration and Verification Test of Cinnamon Soil Simulation Parameters Based on Discrete Element Method
2022
Dergi:  
Agriculture
Yazar:  
Özet:

: To obtain the discrete element simulation model parameters suitable for the interaction between cinnamon soil and soil-engaging components, the Hertz–Mindlin with JKR contact model in EDEM simulation software was used to calibrate the relevant model parameters of cinnamon soil. Firstly, the particle size distribution, moisture content, volume density, Poisson’ s ratio, shear modulus, and other parameters of the cinnamon soil were measured with cinnamon soil as the research object. Further, taking the stacking angle as the response value, the Plackett–Burman test, the steepest climbing test, and the Box–Behnken were designed by using the Design-Expert software to calibrate and optimize the physical parameters of soil simulation. The optimal parameter combination was obtained: cinnamon soil–cinnamon soil rolling friction coefficient was 0.08, soil JKR surface energy was 0.37 J/m −2, and cinnamon soil–steel static friction coefficient was 0.64. Finally, the discrete element simulation verification test of stacking angle and cutting resistance was carried out under the calibrated parameters. The comparative calculation showed that the relative error between the simulated stacking angle and the measured stacking angle was 0.253%, and the maximum relative error between the simulated cutting resistance and the measured cutting resistance was 10.32%, which was within the acceptable range, indicating the high accuracy and reliability for the calibration parameters. The research results have important reference value for the energy-saving and consumption-reducing design of soil tillage components and provide basic data for the simulation of cutting resistance research of cinnamon-soil-engaging components.

Anahtar Kelimeler:

2022
Dergi:  
Agriculture
Yazar:  
Atıf Yapanlar
Bilgi: Bu yayına herhangi bir atıf yapılmamıştır.
Benzer Makaleler












Agriculture

Dergi Türü :   Uluslararası

Metrikler
Makale : 9.549
Atıf : 6.367
2023 Impact/Etki : 0.04
Agriculture