Görüntüleme
11
İndirme
2
Bu çalışmada, askının bazı örme yapıların kumaş özellikleri üzerindeki etkisini incelemek amaçlanmıştır. Numuneler V-yataklı Stoll örme makinesinde %100 akrilik iplik kullanılarak örülmüştür. Beş farklı örgü yapısında (1x1 rib, yarım selanik, çift askılı yarım selanik, selanik ve çift askılı selanik) kumaş aynı makine ayarlarında üretilmiştir. Test sonuçları çift askılı selanik kumaşın en yüksek kumaş kalınlığı, ısıl direnç ve sürtünme katsayısına sahip olduğunu göstermektedir. Çift askılı yarım selanik kumaş en yüksek hava geçirgenliği değerine sahipken, 1x1 rib kumaş ise en yüksek bağıl su buharı geçirgenliği, gramaj ve ilmek iplik uzunluğuna sahiptir. Yarım selanik kumaş ise en yüksek eğilme direncine sahiptir. Yarım selanik-çift askılı yarım selanik ve selanik-çift askılı selanik kumaşların test sonuçlarının kendi aralarında benzer olduğu gözlenmiştir. Ancak, 1x1 rib kumaşın boyutsal, mekanik ve konfor özellikleri selanik ve türevlerinden oldukça farklıdır.
In this study, it is intended to study the impact of some steam structures on the fabric properties. The samples are rejoiced using a 100% acrylic thread in the V-bed Stoll mounting machine. Five different wire structures (1x1 rib, half-salanic, double-salanic, half-salanic and double-salanic) fabric are manufactured in the same machine settings. The test results show that the double-heated selanium fabric has the highest fabric thickness, heat resistance and drainage rate. The double hanged semi-selanic fabric has the highest air passivity value, while the 1x1 rib fabric has the highest connected water steam passivity, grammage and wire wire length. Half-salanic fabric has the highest inclination resistance. The test results of half-selanic-double attached half-selanic and half-selanic-double attached selanic fabric were observed to be similar to each other. However, the size, mechanical and comfort characteristics of 1x1 rib fabric are quite different from the selanium and derivatives.
Exploring the effect of tuck loops on fabric properties of some knitted structures was aimed in this study. Samples were produced on a Stoll V-bed knitting loom with 100% acrylic yarn. Five types of knit structures (1x1 rib, half cardigan, double half cardigan, cardigan and double cardigan) were knitted with identical machine settings. Test results revealed that double cardigan fabric has the highest fabric thickness, thermal resistance and coefficient of friction. Double half cardigan provides the highest air permeability, whereas 1x1 rib structure has the highest relative water vapor permeability, mass per unit area and loop length. Half cardigan has the highest bending rigidity. Half cardigan and double half cardigan both have the best pilling results. It was observed that test results of half cardigan-double half cardigan and cardigan-double cardigan are generally similar as pairs. However, dimensional, mechanical and comfort characteristics of 1x1 rib fabric seem quite different.
Alan : Mühendislik; Fen Bilimleri ve Matematik
Dergi Türü : Ulusal
Makale Detay 
Benzer Makaleler
PDF Görüntüle
Dergi Bilgisi
Eseri Dinleyin
Alıntı Yap
Bu Sayfayı Yazdırın
Paylaş
Mendeley
