Bu çalışmada, genleştirilmiş perlitin odun-plastik kompozitlerde kullanılmasının bazı mekanik, termal ve morfolojik özellikler üzerine etkisi araştırılmıştır. Kompozitlerin üretilmesi için polipropilen (PP), genleştirilmiş perlit, karaçam testere talaşı, mısır koçanı talaşı ve MAPP bağlayıcının bulunduğu reçeteler kullanılmıştır. Hazırlanan karışımlar ikiz vidalı ekstruder kullanılarak kompozit malzemeler üretilmiştir. Kompozitler içerisinde lignoselülozik maddelerin miktarı sabit tutularak genleştirilmiş perlitin miktarı tedrici olarak artırılarak etkisi araştırılmıştır. Üretilen kompozit levhalardan hazırlanan test örneklerinin mekanik (eğilme, çekme ve şok direnci, yüzey sertliği) özelliklerinin yanı sıra termal (TGA ve DSC) ve SEM analizleri yapılarak özellikleri araştırılmıştır. Analiz sonuçlarına göre genel olarak kompozit malzeme içerisindeki genleştirilmiş perlit oranı arttıkça eğilme direnci, çekme direnci, elastikiyet modülü, şok direnci ve sertlik değerlerinin arttığı belirlenmiştir. Ayrıca plastik malzeme ile lignoselülozik ve genleştirilmiş perlit arasında bağ yapması için eklenen MAPP maddesi, kompozitlerin mekanik özelliklerini iyileştirdiği anlaşılmıştır. Sonuç olarak, kompozitlere eklenen genleştirilmiş perlitin odun plastik kompozit malzemenin özelliklerini iyileştirdiği anlaşılmıştır.
In the study, some technological properties of composites obtained by using expanded perlite in wood-plastic composites were investigated. Expanded perlite, polypropylene (PP), sawdust, corn cob shavings and MAPP interface agent were used for the preparation of polymer composites. Twin screw extruder was used for composite production. The amount of lignocellulosic materials in the composites was kept constant and the amount of expanded perlite was gradually increased and the effect of the amount of perlite on the properties of the composites was investigated. The mechanical (bending, tensile and shock resistance), physical (surface hardness), thermal (TGA and DSC) and SEM analyzes of the test samples prepared from the obtained composites were carried out and their technological properties were investigated. According to the results of the analysis, it was understood that as the expanded perlite ratio in the composite material increased, the results of flexural strength, tensile strength and modulus of elasticity increased, but the shock resistance decreased. In addition, it was understood that the MAPP material added to bond between lignocellulosic and plastic improves the mechanical properties of the composites. According to the results obtained, it was understood that the expanded perlite added to the composites improved the technological properties of the wood plastic composite material.
Dergi Türü : Ulusal
Benzer Makaleler | Yazar | # |
---|
Makale | Yazar | # |
---|