Beton, günümüz dünyasında inşaat endüstrisi için kullanım alanı en fazla olan taşıyıcı yapı malzemesidir. Beton malzemenin mekanik özelliklerinin geliştirilmesi proje güvenliği açısından da oldukça önemlidir. Bazalt lifler bazaltın yüksek sıcaklıklarda ergitilmesi sonucu elde edilen malzemelerdir. Liflerin beton malzemede kullanım amacı, basınç dayanımı yanında çekme ve eğilme dayanımını geliştirerek malzemeye sünek davranış özelliği kazandırabilmektir. Bu çalışmada, beton malzemeye bazalt lifi katkının etkisi araştırılmıştır. Bu amaçla üretilen beton numunelere çimento hacminin %1’i oranında bazalt lifi katkı ilave edilerek deney örnekleri üretilmiş, 7 ve 28 günlük deney örnekleri üzerinde basınç dayanımı, ultrases geçiş hızı ve yarmada çekme dayanımı deneyleri uygulanmıştır. Sonuç olarak, bazalt lifi katkının beton deney örneklerinin yarmada çekme dayanımlarını %16 oranında arttırdığı tespit edilmiştir.
Beton is the carrier building material that is the most widely used for the construction industry in today's world. The development of the mechanical characteristics of the concrete material is also very important in terms of project safety. Basalt fibers are materials obtained as a result of the erection of basalt at high temperatures. The purpose of the use of the lifts in concrete material is to be able to gain the material with a sharp behavior character by improving the drawing and inclination resistance along with pressure resistance. In this study, the effect of the basalt fiber contribution to the concrete material was studied. Examples of concrete produced for this purpose were produced by adding a basalt fiber contribution of 1% of the cement volume to the concrete samples, 7 and 28 days of experiment samples were applied pressure resistance, ultrasound transition speed and drag resistance experiments. As a result, it has been found that the basalt fiber contribution increased the drawing resistance of concrete test samples by 16%.
Dergi Türü : Ulusal
Benzer Makaleler | Yazar | # |
---|
Makale | Yazar | # |
---|