Kullanım Kılavuzu
Neden sadece 3 sonuç görüntüleyebiliyorum?
Sadece üye olan kurumların ağından bağlandığınız da tüm sonuçları görüntüleyebilirsiniz. Üye olmayan kurumlar için kurum yetkililerinin başvurması durumunda 1 aylık ücretsiz deneme sürümü açmaktayız.
Benim olmayan çok sonuç geliyor?
Birçok kaynakça da atıflar "Soyad, İ" olarak gösterildiği için özellikle Soyad ve isminin baş harfi aynı olan akademisyenlerin atıfları zaman zaman karışabilmektedir. Bu sorun tüm dünyadaki atıf dizinlerinin sıkça karşılaştığı bir sorundur.
Sadece ilgili makaleme yapılan atıfları nasıl görebilirim?
Makalenizin ismini arattıktan sonra detaylar kısmına bastığınız anda seçtiğiniz makaleye yapılan atıfları görebilirsiniz.
 Görüntüleme 8
 İndirme 3
SERBEST ÇALIŞAN DİŞ HEKİMLERİNİN TOTAL PROTEZ YAPIMI SIRASINDA KULLANDIKLARI TEKNİKLERİN VE MATERYALLERİN ARAŞTIRILMASI
2016
Dergi:  
Current Research in Dental Sciences
Yazar:  
Özet:

Amaç. Çalışmamızın amacı, serbest çalışan diş hekimlerinin total protez yapımı sırasında izlediği aşamaları, kullandıkları teknikleri ve materyalleri incelemektir. Gereç ve Yöntem. Çalışmada total protez aşama- larını içeren 18 soruluk bir anket kullanıldı. Anket çalışması 1974 ve 2013 yılları arasında mezun olmuş, rastgele seçilen yaşları 24 ila 57 arasında olan 50 diş hekimiyle (28 kadın, 21 erkek) yapıldı. Sonuçların analizi tanımsal istatistiklerden yüzdelik frekanslarla yapıldı. Bulgular. Çalışmaya katılan diş hekimlerinin %50’sinin ikinci ölçü alımında çinko oksit öjenol kullan- dığı, %90’ının dikey boyut belirlemede Niswonger yöntemi kullandığı, %94’ünün yüz arkı kullanmadığı, %46’sının yüz arkı kullanarak ve kullanmadan yapılan protezler arası fark olmadığını düşündüğü, %86’sının mandibulada stabilizasyonu çoğunlukla sağladığını, %54’ünün maksillada stabilizasyonu her zaman sağladığı, %56’sının protez sonrası besleme ihtiyacı duyduğu, %78’inin protez yapıştırma ajanlarını öner- mediği ve %86’sının total protez yapmayı sevdiği bulunmuştur. Sonuçlar. Çalışmamızda elde edilen veriler sonu- cunda, total protez yapımında serbest çalışan diş hekimlerinin kullandıkları yöntem ve materyallerin, fakültede verilen total protez eğitimi sırasında kullandıkları yöntem ve materyallere yakın olduğu rapor edilmiştir. Bununla beraber, bu konuda ileri araştırmalar yapılması gereklidir. Anahtar Kelimeler: Tam protez, Teknik, Materyal   STEPS, TECHNIQUES AND MATERIALS USED MAKING COMPLETE DENTURES – A SURVEY ABSTRACT   Aim: The aim of this study was to identify the steps, techniques and materials used in making complete dentures in general dental practice. Materials and Methods. A questionnaire with 18 questions, including the step by step phases of complete denture making were used in this study. Questionnaires were filled by randomly chosen 50 dentists who work out of the faculties and graduated between 1974 and 2013 years. Results were determined by percentiles. Results. Survey was showed that 50% of the dentists were using zinc oxide eugenol as secondary impression material. 90% of the dentists were using Niswonger method to assess the vertical dimension. 94% of the dentists were not using face bow, and 46% of the dentists thought that there was any difference between the denture made by using face bow or not. 86% of the dentists were reported they could mostly provide the stabilization of the mandibular denture. 54% of the dentists were reported they could always provide the stabilization of the maxillary denture. 56% of the dentists were needed relining after completing denture. 78% of the dentists were not recommending use of a denture adhesive. And 86% of the dentists were liked making complete dentures. Conclusions. Survey results were showed that, the steps, techniques and materials used in making complete denture in general dental practice were nearly the same with the steps, techniques and materials used in complete denture education. Although, further investigation was needed. Keywords: Complete denture, Technique, Materia

Anahtar Kelimeler:

The research of the techniques and materials used in the total prototype of the freelancers.
2016
Yazar:  
Özet:

The purpose. The aim of our study is to explore the stages, techniques and materials they use during the production of total protheses by free-working dentists. means and methods. In the study, a survey of 18 questions contained the total prothesis stages was used. The survey was conducted with 50 dentists (28 women, 21 men) who graduated between 1974 and 2013, randomly selected ages between 24 and 57. The analysis of the results was done with percentage frequencies from the descriptive statistics. The findings. The study found that 50% of the dentists who participated in the study used zinc oxide ojenol in the second measurement, 90% used Niswonger method in the vertical measurement, 94% did not use the face ark, 46% thought there was no difference between the protheses made using the face ark and without the use, 86% found that it mostly provided stabilization in the mandibula, 54% found that it always provided stabilization in the maxillate, 56% found that it needed postprothesis nutrition, 78% suggested the prothesis adhesive agents, and 86% found that it loved to make total prothesis. The results. The data obtained in our study have been that the methods and materials used by free dentists in the production of total prothesis are close to the methods and materials used during the total prothesis training given at the faculty. However, further research on this is necessary. Keywords: Complete Dentures, Technical, Material STEPS, TECHNIQUES AND MATERIALS USED MAKING COMPLETE DENTURES - A SURVEY ABSTRACT Aim: The aim of this study was to identify the steps, techniques and materials used in making complete dentures in general dental practice. Materials and Methods. A questionnaire with 18 questions, including the step-by-step phases of complete denture making were used in this study. Questionnaires were filled by randomly chosen 50 dentists who work out of the faculties and graduated between 1974 and 2013 years. Results were determined by percentiles. The results. The survey was shown that 50% of the dentists were using zinc oxide eugenol as secondary impression material. 90% of the dentists were using Niswonger method to assess the vertical dimension. 94% of the dentists were not using face bow, and 46% of the dentists thought there was any difference between the denture made by using face bow or not. 86% of the dentists were they could mostly provide the stabilization of the mandibular denture. 54% of the dentists were they could always provide the stabilization of the maxillary denture. 56% of the dentists were needed relining after completing denture. 78% of the dentists were not recommending use of a denture adhesive. And 86% of the dentists were liked making complete dentures. and conclusions. The results of the survey were shown that, the steps, techniques and materials used in making complete denture in general dental practice were the same with the steps, techniques and materials used in complete denture education. Further investigation was needed. Keywords: Complete denture, Technique, Materia

Anahtar Kelimeler:

Atıf Yapanlar
Bilgi: Bu yayına herhangi bir atıf yapılmamıştır.
Benzer Makaleler












Current Research in Dental Sciences

Dergi Türü :   Ulusal

Metrikler
Makale : 1.431
Atıf : 2.160
2023 Impact/Etki : 0.013
Current Research in Dental Sciences