Bu çalışmada, borik asit ve amonyum hidrojen florürün reaksiyonu ile amonyum floroborat (NH4BF4) üretimine ait üretim parametreleri incelenmiştir. Bu amaçla, reaktif besleme oranı, reaksiyon sıcaklığı, karıştırma hızı, karıştırıcı cinsi, ikinci çözücü etkisi parametrelerinin etkileri ayrı ayrı belirlenmiştir. Reaksiyon sonucu elde edilen kristallerin yapısal analizleri ve yüzey morfolojileri ise sırasıyla XRD, FT-IR ve SEM analizleri yapılarak aydınlatılmaya çalışılmıştır. Amonyum floroborat üretimi için en uygun reaksiyon şartları; reaktif besleme oranı, 1:2; reaksiyon sıcaklığı, 90 oC; karıştırıcı cinsi, sıcak hava şeklinde tespit edilmiştir. Limit oksijen indeksi analizleri, amonyum floroboratın mükemmel alev geciktirici olduğunu göstermiştir.
In this study, the production parameters associated with the reaction of boric acid and ammonium hydrogen fluoride and the production of ammonium floroborat (NH4BF4) were studied. For this purpose, the effects of the reactive feeding rate, reaction temperature, mixture speed, mixer gender, second solvent effect parameters are determined separately. The structural analyses and surface morphologies of the crystals obtained as a result of the reaction were tried to be illuminated by XRD, FT-IR and SEM analyses, respectively. The best reaction conditions for the production of ammonium floroborat; reactive nutrition rate, 1:2; reaction temperature, 90 oC; mixer gender, hot air form has been detected. Limit oxygen index analyses have shown that ammonium floroborat is an excellent flamming retardant.
In this study, the production parameters of ammonium fluoroborate (NH4BF4) synthesis with reaction between boric acid and ammonium hydrogen fluoride were investigated. For this purpose, the effects of parameters such as reactive feeding ratio, reaction temperature, stirring rate, stirrer type, second solvent effect determined separately. Surface morphologies and structural analysis of the crystals obtained after reaction were determined by XRD, FT-IR and SEM analysis respectively. The optimum production conditions were found as reactant feeding rate 1:2, reaction temperature 90 oC, stirring type hot air stirring. Limited oxygen index test results showed that ammonium fluoroborate exhibits excellent flame retardance.
Alan : Fen Bilimleri ve Matematik; Mühendislik; Sağlık Bilimleri
Dergi Türü : Ulusal
Benzer Makaleler | Yazar | # |
---|
Makale | Yazar | # |
---|