Kullanım Kılavuzu
Neden sadece 3 sonuç görüntüleyebiliyorum?
Sadece üye olan kurumların ağından bağlandığınız da tüm sonuçları görüntüleyebilirsiniz. Üye olmayan kurumlar için kurum yetkililerinin başvurması durumunda 1 aylık ücretsiz deneme sürümü açmaktayız.
Benim olmayan çok sonuç geliyor?
Birçok kaynakça da atıflar "Soyad, İ" olarak gösterildiği için özellikle Soyad ve isminin baş harfi aynı olan akademisyenlerin atıfları zaman zaman karışabilmektedir. Bu sorun tüm dünyadaki atıf dizinlerinin sıkça karşılaştığı bir sorundur.
Sadece ilgili makaleme yapılan atıfları nasıl görebilirim?
Makalenizin ismini arattıktan sonra detaylar kısmına bastığınız anda seçtiğiniz makaleye yapılan atıfları görebilirsiniz.
 Görüntüleme 14
 İndirme 1
Determining the influence of carbon black in oil on the wear resistance of elements in the tribological system "steel – oil – bronze"
2019
Dergi:  
Eastern-European Journal of Enterprise Technologies
Yazar:  
Özet:

The results of experimental research into the influence of the concentration of carbon black in industrial oil I-30А and on wear resistance of the tribological system "steel-oil-bronze" are presented. It is assumed that carbon black, obtained by the electric arc method under laboratory conditions, consists of conglomerates and micro-and nanoparticles of carbon, which are found in a wide range from nanometers to tenths of millimeters. The procedure, materials, and equipment for experimental studies of wear resistance of the parts of the tribosystem "steel-bronze" on the friction machine SMC-2 was shown. The research procedure methodology involved the variation by two independent factors: concentration of carbon black in industrial oil I-30А and external loading. Sliding velocity, contour area of the contact and initial temperature of the tribosystem remained constant factors. The obtained experimental data made it possible to establish two main patterns that characterize the process of friction and wear in the studied tribological system. The first pattern reveals the influence of the concentration of carbon black in industrial oil I-30А and external load on friction torque in the couple "steel‒bronze". The second pattern reveals the influence of the same factors on wear resistance of the parts that were tested on the friction machine. The obtained patterns correlate among themselves and determine the scope of rational concentration of conglomerates of micro- and nanoparticles of carbon in industrial oil I-30A, which was applied as a lubricant in the tested tribological system. At the final stage of the research, the surfaces of the parts of friction were studied at the atomic-force microscope "Solver P47-Pro" made by manufacturing company NT-MDT. These studies made it possible to reveal the mechanism of modification of the surface layer of steel and bronze by carbon nanoparticles in their interaction in the tribological system at friction. Author Biographies Serhii Voronin, Ukrainian State University of Railway Transport Feierbakh sq., 7, Kharkiv, Ukraine, 61050 Doctor of Technical Sciences, Associate Professor, Head of Department Department of Construction, Track and Handling Machines

Anahtar Kelimeler:

Atıf Yapanlar
Bilgi: Bu yayına herhangi bir atıf yapılmamıştır.
Benzer Makaleler










Eastern-European Journal of Enterprise Technologies

Alan :   Fen Bilimleri ve Matematik

Dergi Türü :   Uluslararası

Metrikler
Makale : 4.764
Atıf : 4.485
2023 Impact/Etki : 0.294
Eastern-European Journal of Enterprise Technologies