Kullanım Kılavuzu
Neden sadece 3 sonuç görüntüleyebiliyorum?
Sadece üye olan kurumların ağından bağlandığınız da tüm sonuçları görüntüleyebilirsiniz. Üye olmayan kurumlar için kurum yetkililerinin başvurması durumunda 1 aylık ücretsiz deneme sürümü açmaktayız.
Benim olmayan çok sonuç geliyor?
Birçok kaynakça da atıflar "Soyad, İ" olarak gösterildiği için özellikle Soyad ve isminin baş harfi aynı olan akademisyenlerin atıfları zaman zaman karışabilmektedir. Bu sorun tüm dünyadaki atıf dizinlerinin sıkça karşılaştığı bir sorundur.
Sadece ilgili makaleme yapılan atıfları nasıl görebilirim?
Makalenizin ismini arattıktan sonra detaylar kısmına bastığınız anda seçtiğiniz makaleye yapılan atıfları görebilirsiniz.
 Görüntüleme 15
 İndirme 2
Natural Convection from Discrete Heat Sources Placed in Wavy Enclosure
2016
Dergi:  
Tikrit Journal of Engineering Sciences
Yazar:  
Özet:

The effect of sinusoidal corrugated upper surface for enclosure on the heat transfer by natural convection from two heat sources placed on the bottom surface of the enclosure has been studied. The two heat sources constant and high temperature, length of each heat source (10%) from the total length of bottom surface, the distances that do not contain heat source on the bottom surface thermally insulated, temperature of verticals walls and upper surface low and constant. corrugating upper surface was change the dimensional corrugation amplitude between (0.1-0.3), for number of corrugations (3), the dimensional distances between the two heat sources were change between (0.2-0.8), the Rayleigh numbers ranged between (103 ≤ Ra ≤ 105), the fluid inside the enclosure was air Prandtl number for it (0.7). were analyzed flow and temperature fields inside the enclosure numerically by solving Navier Stokes and Energy Equations, have been used Cartesian velocity components and pressure on a collocated grid are used as dependent variables in the momentum equations which discretized by finite volume method, body fitted coordinates are used to represent the geometry shape of the problem accurately, were grid generated technique based on elliptic partial differential equations, SIMPLE algorithm is used to adjust the velocity field to satisfy the conservation of mass. The results showed the increase in the magnitude of dimensional distance between two heat sources lead to increased average Nusselt number for all values of Rayleigh numbers (103 ≤ Ra ≤ 105), as are the highest value of the average Nusselt number at dimensional distance (0.8)and less value at the dimensional distance (0.2), the dimensional distance (0.6) is a special case when the Rayleigh number equal (105) as at least average Nusselt number from the remaining values of the two dimensional distances (0.2) and (0.4), as the average Nusselt number increases with increasing dimensional corrugation amplitude for the number of corrugations (N=3) for dimensional distance (0.8), as well as comparing numerical results showed good agreement with published results.

Anahtar Kelimeler:

Atıf Yapanlar
Bilgi: Bu yayına herhangi bir atıf yapılmamıştır.
Benzer Makaleler




Tikrit Journal of Engineering Sciences

Dergi Türü :   Uluslararası

Metrikler
Makale : 536
Atıf : 101
2023 Impact/Etki : 0.093
Tikrit Journal of Engineering Sciences