Kullanım Kılavuzu
Neden sadece 3 sonuç görüntüleyebiliyorum?
Sadece üye olan kurumların ağından bağlandığınız da tüm sonuçları görüntüleyebilirsiniz. Üye olmayan kurumlar için kurum yetkililerinin başvurması durumunda 1 aylık ücretsiz deneme sürümü açmaktayız.
Benim olmayan çok sonuç geliyor?
Birçok kaynakça da atıflar "Soyad, İ" olarak gösterildiği için özellikle Soyad ve isminin baş harfi aynı olan akademisyenlerin atıfları zaman zaman karışabilmektedir. Bu sorun tüm dünyadaki atıf dizinlerinin sıkça karşılaştığı bir sorundur.
Sadece ilgili makaleme yapılan atıfları nasıl görebilirim?
Makalenizin ismini arattıktan sonra detaylar kısmına bastığınız anda seçtiğiniz makaleye yapılan atıfları görebilirsiniz.
 Görüntüleme 19
Mechanical Properties of Self-Compacted Concrete
2016
Dergi:  
Tikrit Journal of Engineering Sciences
Yazar:  
Özet:

In this research, trial mixes were conducted according to Self-Compacted Concrete (SCC) specifications, a mix that gave a higher compressive strength to the age of seven days has been selected. Then after selecting the appropriate mix, concrete samples had poured and were distributed into five groups; each group consists of six cubes, six cylinders, and six prisms. The samples of each group are testing for compressive, tensile splitting, and flexure strengths respectively for the ages of 7, 14, 28, 60, and 90 days respectively. Before of conduction of destructive tests, the samples were tested using ultrasonic waves to determine the relationship between the concrete strength and pulse velocity and in the same way for all ages in above. Experimental results showed that, all concrete mechanical properties have improved, and the maximum improve was in flexural strength followed by compressive strength and tensile splitting strength. The cube compressive strength increased according to (G1 at 7 days curing) from 34.3% to 71.8%, the percentage of increase of tensile strength according to (G1 at 7 days curing) from 16.8% to 64.3% , modulus of rupture increased according to (G1 at 7 days curing) from 34.6% to 98.7% for ages (14, 28, 60, 90 days) respectively. Pulls velocity increased according to (G1 at 7 days curing): For cube from 5.1% to 23.9%, for cylinder from 21.4% to 40.3%, for prisms from 7.1% to 29.2%.

Anahtar Kelimeler:

null
2016
Yazar:  
0
2016
Yazar:  
Atıf Yapanlar
Bilgi: Bu yayına herhangi bir atıf yapılmamıştır.
Benzer Makaleler












Tikrit Journal of Engineering Sciences

Dergi Türü :   Uluslararası

Metrikler
Makale : 536
Atıf : 101
2023 Impact/Etki : 0.093
Tikrit Journal of Engineering Sciences