Kullanım Kılavuzu
Neden sadece 3 sonuç görüntüleyebiliyorum?
Sadece üye olan kurumların ağından bağlandığınız da tüm sonuçları görüntüleyebilirsiniz. Üye olmayan kurumlar için kurum yetkililerinin başvurması durumunda 1 aylık ücretsiz deneme sürümü açmaktayız.
Benim olmayan çok sonuç geliyor?
Birçok kaynakça da atıflar "Soyad, İ" olarak gösterildiği için özellikle Soyad ve isminin baş harfi aynı olan akademisyenlerin atıfları zaman zaman karışabilmektedir. Bu sorun tüm dünyadaki atıf dizinlerinin sıkça karşılaştığı bir sorundur.
Sadece ilgili makaleme yapılan atıfları nasıl görebilirim?
Makalenizin ismini arattıktan sonra detaylar kısmına bastığınız anda seçtiğiniz makaleye yapılan atıfları görebilirsiniz.
 ASOS INDEKS
 Görüntüleme 11
Investigation of the performance of cathode supported solid oxide fuel cell with energy and exergy analysis at different operating temperatures
2024
Dergi:  
International Journal of Energy Studies
Yazar:  
Özet:

In this research, the performance analysis of a cathode-supported solid oxide fuel cell (SOFC) with an active cell area of 0.0834 m2 and a cathode thickness of 750 µm was carried out under three different operating temperatures (973 K, 1073 K and 1173 K). The power density and cell potential were calculated by determining the losses in the cell at 8 different current densities (1500 A/m2 - 5000 A/m2) for each operating temperature. It was observed that ohmic losses in SOFC have a lower effect on the cell potential compared to other losses. An increase of the operating temperature by 100 K resulted in a decrease in ohmic losses of 3.36×10-8 V under constant current density (CD). In addition, the rise in CD negatively affected all the losses in the cell and decreased the cell voltage. The exergy and energy analysis of SOFC was carried out by calculating the thermal efficiency, exergy destruction, entropy production and exergy efficiency for various operating parameters. An increment of 200 K in the operating temperature increased the thermal efficiency by approximately 2 times at a CD of 5000 A/m2. Also, the minimum entropy production was obtained at an operating temperature of 1173 K and a CD of 1500 A/m2. In this case, the entropy production was calculated as 2.63 kW/K, resulting in a maximum exergy efficiency of 66.93%.

Anahtar Kelimeler:

0
2024
Yazar:  
Anahtar Kelimeler:

Atıf Yapanlar
Bilgi: Bu yayına herhangi bir atıf yapılmamıştır.
Benzer Makaleler










International Journal of Energy Studies

Dergi Türü :   Uluslararası

International Journal of Energy Studies