User Guide
Why can I only view 3 results?
You can also view all results when you are connected from the network of member institutions only. For non-member institutions, we are opening a 1-month free trial version if institution officials apply.
So many results that aren't mine?
References in many bibliographies are sometimes referred to as "Surname, I", so the citations of academics whose Surname and initials are the same may occasionally interfere. This problem is often the case with citation indexes all over the world.
How can I see only citations to my article?
After searching the name of your article, you can see the references to the article you selected as soon as you click on the details section.
 ASOS INDEKS
 Views 4
Kür Sıcaklığının Alkali Aktivasyonlu Lifli Betonunun Kırılma Özelliklerine Etkisi
2022
Journal:  
Osmaniye Korkut Ata Üniversitesi Fen Bilimleri Enstitüsü Dergisi
Author:  
Abstract:

Bu çalışma kapsamında, farklı sıcaklık aktivasyonunda (30°C, 60°C, 90°C ) dayanım kazanan alkali aktivasyonlu lifli betonların (AALB) kırılma özellikleri incelenmiştir. Bu amaçla 50x100x480 mm boyutlarında 10 mm çentik uzunluğuna sahip kiriş örnekler üretilmiştir. Eğilme etkisindeki kiriş örnekler üzerinden elde edilen Yük-CMOD grafiği altında kalan alanlar hesaplanarak kırılma enerjisi değerleri elde edilmiştir. Hesaplanan değerler üzerinden kırılma enerjisine sıcaklık kürünün etkisi basınç ve eğilme dayanımı değerleri ile karşılaştırmalı olarak incelenmiştir. Sonuç olarak aktivasyon sıcaklığının artışı ile kırılma enerjisi değerlerinde önemli bir artış olduğu görülmüştür. Yüksek dayanımlı AALB’ler üzerinde gerçekleştirilen deneyler sonucunda en yüksek kırılma enerjisi değerine 90 °C sıcaklık kürü uygulanan örnekler ulaşmıştır. En yüksek basınç ve eğilme dayanımı sırasıyla 82 MPa ve 3,78 MPa olarak elde edilmiştir.

Keywords:

Effect Of Curing Temperature On Fracture Properties Of Alkali-activated Fiber Concrete
2022
Author:  
Abstract:

Within the scope of this study, the fracture properties of alkali-activated fiber concrete (AAFC) that gain strength at different temperature activation (30°C, 60°C, 90°C) were investigated. For this purpose, beam specimens with dimensions of 50x100x480 mm and a notch length of 10 mm were produced. The fracture energy values were obtained by calculating the areas under the Load-CMOD graph obtained from the beam specimens under the flexure effect. The effect of temperature curing on fracture energy over calculated values was investigated comparatively with compressive and flexural strength values. As a result, it was observed that there was a significant increase in the fracture energy values with the increase of the activation temperature. As a result of the experiments performed on high-strength AAFCs, the specimens that were cured at 90 °C reached the highest fracture energy value. The highest compressive and flexural strengths were obtained as 82 MPa and 3.78 MPa, respectively.

Keywords:

Citation Owners
Information: There is no ciation to this publication.
Similar Articles










Osmaniye Korkut Ata Üniversitesi Fen Bilimleri Enstitüsü Dergisi

Journal Type :   Uluslararası

Osmaniye Korkut Ata Üniversitesi Fen Bilimleri Enstitüsü Dergisi