Kullanım Kılavuzu
Neden sadece 3 sonuç görüntüleyebiliyorum?
Sadece üye olan kurumların ağından bağlandığınız da tüm sonuçları görüntüleyebilirsiniz. Üye olmayan kurumlar için kurum yetkililerinin başvurması durumunda 1 aylık ücretsiz deneme sürümü açmaktayız.
Benim olmayan çok sonuç geliyor?
Birçok kaynakça da atıflar "Soyad, İ" olarak gösterildiği için özellikle Soyad ve isminin baş harfi aynı olan akademisyenlerin atıfları zaman zaman karışabilmektedir. Bu sorun tüm dünyadaki atıf dizinlerinin sıkça karşılaştığı bir sorundur.
Sadece ilgili makaleme yapılan atıfları nasıl görebilirim?
Makalenizin ismini arattıktan sonra detaylar kısmına bastığınız anda seçtiğiniz makaleye yapılan atıfları görebilirsiniz.
 ASOS INDEKS
 Görüntüleme 6
Distillery Waste Water Treatment using Photo-catalytic UV-TiO2 System
2019
Dergi:  
International Journal of Advance in Scientific Research and Engineering
Yazar:  
Özet:

In this study, removal of chemical oxygen demand COD, total suspended solids TSS, total dissolved solids TDS and colour of distillery wastewater using photo-catalytic process with TiO2 was carried out. Wastewater treatment from anaerobic sedimentation tank, COD: 4476 mg/L, TSS: 640 mg/L, total dissolved solids TDS: 720 mg/L was used for the photocatalytic process. The effectiveness of heterogeneous photocatalytic degradation on distillery wastewater using the UV-TiO2 process was investigated in a laboratory scale. For the photocatalytic process, the effect of the catalyst was studied using various amounts of TiO2 (0.1 to 0.5 g/L). Also, the effect of contact time (30 to 180 min) with the different UV power (10 to 30 W) was studied. For 0.1 g/L TiO2 dosage, COD removal 94% with minimum contact time 110 min in 20 W UV power. For 0.2 g/L TiO2 dosage, COD removal 94% with minimum contact time 110 min in 20 W UV power. For 0.3 g/L TiO2 dosage, COD removal 95% with minimum contact time 100 min in 30 W UV power. For 0.4 g/L TiO2 dosage,COD removal 95% with minimum contact time 80 min in 20 W UV power. For 0.5 g/L TiO2 dosage, COD removal 95%L with minimum contact time 80 min in 30 W UV power. By the usage of TiO2 dosage (0.1 to 0.5) g/L, the COD values of treated water effluents were reduced to standard emission guideline 250 mg/L. In the use of the energy usage, the condition with UV power 20 W with TiO2 dosage at the contact time of 110 min was the optimum. In the use of processing time, the condition with UV power 30 W with the 0.4 g/L of TiO2 dosage at the contact time of 80 min was the optimum.

Anahtar Kelimeler:

Atıf Yapanlar
Bilgi: Bu yayına herhangi bir atıf yapılmamıştır.
Benzer Makaleler






International Journal of Advance in Scientific Research and Engineering

Dergi Türü :   Uluslararası

International Journal of Advance in Scientific Research and Engineering