Kullanım Kılavuzu
Neden sadece 3 sonuç görüntüleyebiliyorum?
Sadece üye olan kurumların ağından bağlandığınız da tüm sonuçları görüntüleyebilirsiniz. Üye olmayan kurumlar için kurum yetkililerinin başvurması durumunda 1 aylık ücretsiz deneme sürümü açmaktayız.
Benim olmayan çok sonuç geliyor?
Birçok kaynakça da atıflar "Soyad, İ" olarak gösterildiği için özellikle Soyad ve isminin baş harfi aynı olan akademisyenlerin atıfları zaman zaman karışabilmektedir. Bu sorun tüm dünyadaki atıf dizinlerinin sıkça karşılaştığı bir sorundur.
Sadece ilgili makaleme yapılan atıfları nasıl görebilirim?
Makalenizin ismini arattıktan sonra detaylar kısmına bastığınız anda seçtiğiniz makaleye yapılan atıfları görebilirsiniz.
 Görüntüleme 18
 İndirme 2
Mathematical Modelling of Thin Layer Drying of Alfalfa (Medicago sativa L.) Varieties at Different Temperatures
2020
Dergi:  
Türk Tarım - Gıda Bilim ve Teknoloji Dergisi
Yazar:  
Özet:

In this study, the average drying times of the Frigos, Bilensoy, Nimet and Prosementi alfalfa varieties were determined by drying in a convective dryer (50, 60 and 70°C) and in the open (sun). In addition, the most suitable thin layer drying models were determined, which are important in controlling the drying processes and developing new product-specific dryers. In drying processes, the moisture content of the product was dried up to 10% compared to the wet base. The first moisture contents of the specified varieties according to the wet base are respectively; 76.20, 75.88, 76.13 and 75.07%. In drying processes, it was determined that drying method and temperatures changed average drying times. The longest drying times were determined in the Frigos variety, which was laid in the sun and dried. When the Frigos variety was dried in the oven at 50, 60 and 70°C, the average drying times were determined as 11, 10 and 6 hours. Time-dependent moisture ratios were determined, processed in thin layer drying models and the mathematical model that best predicts drying curves was determined. While creating curves, Page, Midilli, Yağcıoğlu models were used. While acceptable reliability values were found as in all models, among the models, the highest stability value (R2) was found by Midilli was found in equality.

Anahtar Kelimeler:

Mathematical Modelling of Thin Layer Drying of Alfalfa (Medicago sativa L.) Varieties at Different Temperatures
2020
Yazar:  
Özet:

In this study, the average drying times of the Frigos, Bilensoy, Nimet and Prosementi alfalfa varieties were determined by drying in a convective dryer (50, 60 and 70°C) and in the open (sun). In addition, the most suitable thin layer drying models were determined, which are important in controlling the drying processes and developing new product-specific dryers. In drying processes, the moisture content of the product was dried up to 10% compared to the wet base. The first moisture contents of the specified varieties according to the wet base are respectively; 76.20, 75.88, 76.13 and 75.07%. In drying processes, it was determined that drying method and temperatures changed average drying times. The longest drying times were determined in the Frigos variety, which was laid in the sun and dried. When the Frigos variety was dried in the oven at 50, 60 and 70°C, the average drying times were determined as 11, 10 and 6 hours. Time-dependent moisture ratio were determined, processed in thin layer drying models and the mathematical model that best predicts drying curves was determined. While creating curves, Page, Midi, Midi models were used. While acceptable reliability values were found as in all models, among the models, the highest stability value (R2) was found by Midilli was found in equality.

Anahtar Kelimeler:

Atıf Yapanlar
Bilgi: Bu yayına herhangi bir atıf yapılmamıştır.
Benzer Makaleler








Türk Tarım - Gıda Bilim ve Teknoloji Dergisi

Alan :   Ziraat, Orman ve Su Ürünleri

Dergi Türü :   Uluslararası

Metrikler
Makale : 2.775
Atıf : 3.119
2023 Impact/Etki : 0.105
Türk Tarım - Gıda Bilim ve Teknoloji Dergisi