Bu çalışmada, serbest ucundan P yüküne maruz tek yönlü fiberlerle takviye edilmiş polimer matriksli kompozit ankastre bir kiriş için anizotrop elastisite teorisi kullanılarak elasto-plastik gerilme analizi yapılmıştır. 0°, 30° 45°, 60° ve 90° oryantasyon açıları için akma noktaları hesaplanarak ?x kalıntı gerilme bileşenleri elde edilmiştir. Akma, 0° ve 90° oryantasyon açıları için kirişin en alt ve en üst yüzeylerinde aynı anda başlamaktadır. 30°, 45°ve 60° oryantasyon açıları için ise kirişin en üst yüzeyinde akmanın daha önce başladığı görülmüştür. Kirişin en alt ve en üst yüzeylerinde ?x kalıntı gerilme bileşeni maksimumdur. Bu çalışmanın sonucunda tek yönlü fiberlerle takviye edilmiş polimer matriksli kompozit kiriş için elde edilen ?x kalıntı gerilme bileşenleri, daha önceki alışmalarda örgü fiberlerle takviye edilmiş termoplastik matriksli kompozit kiriş için elde edilmiş olan ?x kalıntı gerilme bileşenleri ile karşılaştırılmıştır.
In this study, the elasto-plastic stretch analysis was performed using the theory of anizotropic elasticity for a polymer matrix composite anchor, supplemented with one-way fiber exposed to the load from the free end to P. By calculating the flow points for the 0°, 30° 45°, 60° and 90° orientation angles, the remaining x stretching components were obtained. The flow begins simultaneously at the lower and upper surfaces of the curve for 0° and 90° orientation angles. For the 30°, 45° and 60° orientation angles, it has been seen that the flow on the top surface of the curve has already begun. On the lower and upper surfaces of the left, the remainder x is the maximum stretching component. As a result of this study, the “x remainder stretching components” obtained for polymer matrix composite curve supplemented with one-way fiber were compared with the “x remainder stretching components” obtained for thermoplastic matrix composite curve supplemented with curve fiber in previous habits.
Field : Mühendislik
Journal Type : Ulusal
Relevant Articles | Author | # |
---|
Article | Author | # |
---|