Elyaf takviyeli polimer kompozit (ETPK) malzemeler, yüksek mukavemet ve sönümleme, hafiflik, düşük termal genleşme gibi mühendislik özelliklerinden dolayı uzay ve havacılık sanayisinde cıvatalı, perçinli ve pimli bağlantılarda yaygınlıkla kullanılmaktadır. Ancak, metallere göre daha karmaşık yapıya sahip oldukları için delme işlemi esnasında delik giriş ve çıkışında delaminasyon, matris fazında bozulma ve elyaf kopması gibi etkenler, bu malzemelerin sahip olduğu mühendislik özelliklerinin azalmasına sebep olmaktadır. Bu malzemeler, uzay ve havacılık sektöründe özellikle gövde-kanat bağlantıları için titanyum ve alüminyum gibi metaller ile birlikte istiflenerek delinmektedir. İstiflenmiş malzemelerin herbiri, farklı özelliklere sahip olduğundan, delme işlemi esnasında hassas işlenmiş yüzey kalitesi için optimum kesme şartlarının belirlenmesi gerekmektedir. Bu çalışmada, ETPK malzemelerin yekpare ve metaller ile istiflenmiş halde delinmesi ile ilgili literatürde yapılan çalışmalar araştırılarak elde edilen bulgular bir arada sunulmuştur.
Fiber-supplemented polymer composite (ETPK) materials are widely used in the space and aviation industry due to their engineering characteristics such as high strength and deforestation, lightness, low thermal prolongation, and are widely used in coveted, coveted and pimples connections. However, because they have a more complex structure than metals, factors such as delamination in the hole entrance and exit during the dive process, deformation in the matrix phase and fiber breakdown, cause a decrease in the engineering characteristics that these materials have. In the space and aviation sector, these materials are folded with metals such as titanium and aluminum, especially for body-wire connections. Since each of the welded materials has different characteristics, it is necessary to determine the optimal cutting conditions for the precise processed surface quality during the cutting process. In this study, the findings obtained by researching the literature of the ETPK materials and the metals in the fields of clamping and clamping were presented together.
Alan : Mimarlık, Planlama ve Tasarım; Mühendislik
Dergi Türü : Uluslararası
Benzer Makaleler | Yazar | # |
---|
Makale | Yazar | # |
---|