Bu çalışmada, seleksiyon yoluyla ıslah edilmiş üstün özellikli bazı kuşburnu genotiplerinin yarı-odun çelikleriyle çoğaltılabilme olanakları araştırılmıştır. Çalışmada, farklı türlere ait dört kuşburnu genotipinin yarı-odun çelikleri kullanılmıştır. Çelikler Ağustos ayının son haftasında alınmış ve 0, 1000 ve 2000 ppm İndol Butirik Asit (IBA) uygulanarak sisleme ünitesinde perlit ortamına dikilmiştir. Köklenme ortamında iki ay süreyle tutulan çelikler sökülerek kallüslenme oranı, köklenme oranı, kök kuru ağırlık oranı, kök sayısı ve kök uzunluğu özellikleri belirlenmiştir. Araştırma sonucunda en düşük ve en yüksek ortalama köklenme oranları %12.22-45.55 ile R. canina türüne ait MR-26 nolu genotipten elde edilmiştir. Diğer yandan genotiplerin ortalama değerleri dikkate alındığında, köklenme oranı bakımından en uygun IBA dozu 2000 ppm olmuştur. Birinci yılın köklenme oranları ikinci yıla göre daha başarılı bulunmuştur. R. dumalis türüne ait genotiplerde (MR-12, 15) kök kuru madde oranları diğer iki türden belirgin bir şekilde daha yüksek bulunmuştur. Kök uzunluğu ve kök sayılar bakımından uygulamalar arasında önemli bir fark bulunmamıştır. Sonraki çalışmalarda yarı-odun çeliklerine 2000 ppm IBA’dan daha yüksek konsantrasyonların denenmesi gerektiği sonucuna varılmıştır.
This study has studied the possibilities of reproduction by semi-wood steel of some superior characteristics of cranberries that are diluted through selection. In the study, four semi-wood steel genotypes of different species were used. Steel was taken in the last week of August and planted in the perlit environment in the welding unit by applying 0, 1000 and 2000 ppm Indol Butiric Acid (IBA). Stainless steel kept in the root environment for two months is dissolved; the root rate, the root rate, the root dry weight rate, the root number and the root length characteristics are determined. The study found that the lowest and highest average root rate was 12.22-45.55% from the MR-26 genotype of the R. canina species. On the other hand, taking into account the average values of genotypes, the most suitable IBA dose in terms of root rate was 2000 ppm. The first year’s roots were more successful than the second year. In the genotypes of the R. dumalis species (MR-12, 15) the root dry substance rates were significantly higher than the other two species. There was no significant difference between roots length and roots numbers. In subsequent studies, it was concluded that semi-wood steels should be tested at concentrations higher than 2000 ppm IBA.
Alan : Fen Bilimleri ve Matematik; Ziraat, Orman ve Su Ürünleri
Dergi Türü : Uluslararası
Benzer Makaleler | Yazar | # |
---|
Makale | Yazar | # |
---|