Kullanım Kılavuzu
Neden sadece 3 sonuç görüntüleyebiliyorum?
Sadece üye olan kurumların ağından bağlandığınız da tüm sonuçları görüntüleyebilirsiniz. Üye olmayan kurumlar için kurum yetkililerinin başvurması durumunda 1 aylık ücretsiz deneme sürümü açmaktayız.
Benim olmayan çok sonuç geliyor?
Birçok kaynakça da atıflar "Soyad, İ" olarak gösterildiği için özellikle Soyad ve isminin baş harfi aynı olan akademisyenlerin atıfları zaman zaman karışabilmektedir. Bu sorun tüm dünyadaki atıf dizinlerinin sıkça karşılaştığı bir sorundur.
Sadece ilgili makaleme yapılan atıfları nasıl görebilirim?
Makalenizin ismini arattıktan sonra detaylar kısmına bastığınız anda seçtiğiniz makaleye yapılan atıfları görebilirsiniz.
 Görüntüleme 8
 İndirme 1
Determination of the physicomechanical characteristics of black chickpea grains
2022
Dergi:  
Journal of New Results in Science
Yazar:  
Özet:

In this study, some physicomechanical characteristics of black chickpea grains, which have rich content, were investigated. Dimensional and volumetric properties, colour characteristics, and frictional and mechanical properties were examined within the physicomechanical properties of the grains. Compression tests were carried out for the behaviour of black chickpea against mechanical force, both force and deformation characteristics of black chickpea grains were determined, and they were used at three different loading speeds (30 mm min-1, 50 mm min-1, 70 mm min-1). The size dimension, such as width, length, and thickness values, were found as 6.68 mm, 8.85 mm, and 6.26 mm, and the mass was 0.25 g, respectively. The highest $a^*$ and $b^*$, $L^*$ values were determined as 4.31, -0.27, and 18.87, respectively. The values of the static friction coefficient of the black chickpea grains on different friction surfaces (PVC, galvanized sheet, laminate, plywood, and rubber) were observed on the rubber surface with the highest. In the mechanical test results, the highest force value was found on the 50 mm min-1 width (Y-) axis, and the highest hardness value was found on the thickness (Z-) axis at the 30 mm min-1 loading speed.

Anahtar Kelimeler:

null
2022
Yazar:  
0
2022
Yazar:  
Atıf Yapanlar
Bilgi: Bu yayına herhangi bir atıf yapılmamıştır.
Benzer Makaleler






Journal of New Results in Science

Dergi Türü :   Uluslararası

Metrikler
Makale : 261
Atıf : 245
2023 Impact/Etki : 0.087
Journal of New Results in Science