GİRİŞ ve AMAÇ: Çalışmanın amacı; metal primer, Nd: YAG lazer ve kumlama yüzey işlemlerinin, Co-Cr alaşım yüzeyi ile kaplama rezini ve akrilik yapay diş materyalleri arasındaki makaslama bağlantı dayanımına etkisini değerlendirmektir. YÖNTEM ve GEREÇLER: Çalışmada Co-Cr metal alaşımı (Magnum H60, İtalya), iki farklı kaplama rezini (Sinfony ve VisioCem, 3M ESPE, Almanya) ve iki farklı yapay diş (Acrylux, İtalya ve Ivoclar Vivadent AG, Liechtenstein) kullanıldı. 240 adet Co-Cr örnek Al2O3 ile kumlandı. Örnekler rezin ve yapay diş materyalleri için 4 gruba ve yüzey işlemleri için 6 alt gruba ayrıldı (n=10). Grup 1’e yüzey işlem uygulanmadı (kontrol). Diğer gruplara ise farklı yüzey işlemleri uygulandı (Grup 2: metal primer, Grup 3: rocatec, Grup 4: Nd: YAG lazer, Grup 5: Nd: YAG lazer+rocatec ve Grup 6: Nd: YAG lazer+metal primer). 2 farklı yapay diş ve 2 farklı kaplama rezin ile bitim yapıldıktan sonra bağlantı dayanımı makaslama bağlantı testi ile değerlendirildi. BULGULAR: En yüksek bağlantı değerleri, lazer+rocatec gruplarında, en düşük değerler ise kontrol gruplarında görüldü. Farklı yüzey işlemleri ve farklı kaplama materyalleri, iskelet alt yapı ile rezin üst yapı bağlantısında etkili oldu (P<.001). Yapay diş ve kaplama rezin grupları kendi aralarında bağlantı dayanımı açısından anlamlı farklılık göstermedi (P>0.05). TARTIŞMA ve SONUÇ: Metal yüzeyine farklı yüzey işlemleri uygulamak makaslama bağlantı değerlerini arttırmaktadır. Metal yüzeyine lazer ve lazerle birlikte rocatec veya metal primer uygulanması bağlantı dayanımını arttırmaktadır.
The aim of the study is to evaluate the impact of metal primary, Nd: YAG laser and welding surface processes on the welding connection resistance between Co-Cr alloy surface and co-cover resin and acrylic artificial tooth materials. Methods and Requirements: The study used Co-Cr metal alloy (Magnum H60, Italy), two different coating resins (Sinfony and VisioCem, 3M ESPE, Germany) and two different artificial teeth (Acrylux, Italy and Ivoclar Vivadent AG, Liechtenstein). 240 Co-Cr samples were sanded with Al2O3. Examples were divided into 4 groups for resin and artificial tooth materials and 6 subgroups for surface processes (n=10). Groupe 1 has not been implemented surface processing (control). Other groups were subjected to different surface processes (Group 2: metal primer, Group 3: rocatec, Group 4: Nd: YAG laser, Group 5: Nd: YAG laser+rocatec and Group 6: Nd: YAG laser+metal primer). After completion with 2 different artificial teeth and 2 different coating resin, the connection resistance was assessed by the coating connection test. The highest connectivity values were seen in the laser+rocatec groups and the lowest values in the control groups. Different surface processes and different coating materials have been effective in linking the skeletal substructure to the refined upper structure (P<.001). Artificial tooth and coating grids do not show significant differences in relation to their connectivity (P>0.05). PROTECTION and RESULT: Applying different surface processes to the metal surface increases the measuring connection values. The application of rocatec or metal primary with laser and laser to the metal surface increases the connection resistance.
Alan : Sağlık Bilimleri
Dergi Türü : Ulusal
Benzer Makaleler | Yazar | # |
---|
Makale | Yazar | # |
---|