Bu çalışmada Mg metaline Al ve Si elementlerinin ilavesi ile bir döküm yapılmıştır. Döküm sırasında atmosfer kontrollü bir döküm fırını kullanılmıştır. Alaşımda saf Mg metaline ilave olarak ağırlıkça %15 Al12Si ingot alaşımı kullanılmıştır. Elde edilen alaşım homojenleştirme sonrası numune haline getirilmiştir. Mg-Al-Si üçlü alaşımı şeklinde hazırlanan alaşım döküm sonrası klasik metalografik yöntemlerle hazırlanmış ve SEM ile mikroyapı incelemesi yapılmıştır. Ek olarak alaşıma elementel analiz uygulanmıştır. Temel mekanik değerler için alaşım Vickers tipinde sertlik testi ölçümüne alınmıştır. Alaşım mikro yapısında oluşan intermetalik fazların dağılımı ve yapıları incelenmiştir. Sonuç olarak standart (AS serisi) bir Mg alaşımı elde edilmiş ve temel özellikleri rapor edilmiştir.
In this study, an extract was made with the addition of the elements Al and Si to Mg metal. During the casting, a atmospheric-controlled casting oven was used. In the alloy, in addition to pure Mg metal, 15% weight Al12Si ingot alloy was used. The extracted alloy has been made a sample after homogenization. Prepared in the form of the Mg-Al-Si triple alloy, the alloy is prepared with the classic metalographic methods after casting and the microbuilding examination with the SEM has been done. In addition, the elementary analysis has been implemented. For basic mechanical values, the alloy is taken to the hardness test measurement in the type Vickers. The distribution and structures of the intermetal phases formed in the alloy micro structure have been studied. As a result, a standard (AS series) Mg alloy has been obtained and the basic properties have been
Alan : Fen Bilimleri ve Matematik; Mühendislik
Dergi Türü : Ulusal
Benzer Makaleler | Yazar | # |
---|
Makale | Yazar | # |
---|