Bu çalışmada, 3-aminopropyltrietho-xysilane (silan) ile muamele edilmiş şerit yongalardan üretilen yönlendirilmiş yonga levhaların (OSB) bazı fiziksel ve mekanik özellikleri belirlenmiştir. Silan kullanım oranının OSB levha özellikleri üzerine etkileri araştırılmıştır. OSB üretiminde kullanılan yongalar tutkal ağırlığına oranla %1, %2 ve %3 oranında silan ile muamele edilmiştir. Levhaların fiziksel özelliklerinden su alma ve kalınlığına şişme, mekanik özelliklerinden ise eğilme direnci (MOR), eğilmede elastikiyet modülü (MOE), yüzeye dik çekme direnci (IB) ve yüzeye dik vida tutma direnci (SWS) belirlenmiştir. Yapılan testlerden elde edilen sonuçlara göre silan kullanım oranının artması ile levhaların fiziksel özelliklerinin iyileştiği, mekanik özelliklerden ise yüzeye dik vida tutma direnci dışındaki özelliklerde azalma meydana geldiği görülmüştür. Fiziksel özelliklerdeki iyileşme ortalama %9-19, SWS dışındaki mekanik özelliklerdeki azalma %3-25 olurken, SWS değeri %14-41 oranında artış göstermiştir.
In this study, some physical and mechanical characteristics of guided junk leaves (OSBs) produced from treated bands with 3-aminopropyltrietho-xysilane (silan) have been determined. The effects of the use rate of silan on OSB leaf characteristics have been studied. The yongs used in the production of OSB were treated with silan by 1, 2% and 3% compared to the attachment weight. From the physical characteristics of the sheets to the water absorption and thickness, the mechanical characteristics of the sheets are determined by the inclination resistance (MOR), the inclination elasticity module (MOE), the rectangular drawing resistance (IB) and the rectangular drawing resistance (SWS). According to the results obtained from the tests, the increase in the use rate of silan has shown that the physical characteristics of the sheets have improved, and the reduction in the characteristics of the mechanical characteristics has occurred in addition to the resistance to holding straight on the surface. The improvement in physical characteristics was an average of 9–19%, the reduction in mechanical characteristics outside of SWS was 3–25%, while the SWS value increased by 14–41%.
Dergi Türü : Uluslararası
Benzer Makaleler | Yazar | # |
---|
Makale | Yazar | # |
---|