Kullanım Kılavuzu
Neden sadece 3 sonuç görüntüleyebiliyorum?
Sadece üye olan kurumların ağından bağlandığınız da tüm sonuçları görüntüleyebilirsiniz. Üye olmayan kurumlar için kurum yetkililerinin başvurması durumunda 1 aylık ücretsiz deneme sürümü açmaktayız.
Benim olmayan çok sonuç geliyor?
Birçok kaynakça da atıflar "Soyad, İ" olarak gösterildiği için özellikle Soyad ve isminin baş harfi aynı olan akademisyenlerin atıfları zaman zaman karışabilmektedir. Bu sorun tüm dünyadaki atıf dizinlerinin sıkça karşılaştığı bir sorundur.
Sadece ilgili makaleme yapılan atıfları nasıl görebilirim?
Makalenizin ismini arattıktan sonra detaylar kısmına bastığınız anda seçtiğiniz makaleye yapılan atıfları görebilirsiniz.
  Atıf Sayısı 1
 Görüntüleme 25
 İndirme 4
Development of a method for producing fruit berry paste and equipment for its implementation
2020
Dergi:  
Technology Audit and Production Reserves
Yazar:  
Özet:

The object of research is the technological process for the production of fruit and berry semi-finished product. Existing technologies for processing fruit and berry raw materials are characterized by the loss of valuable components of the feedstock, namely blanching at a temperature of 85-100 °C and long-term boiling, resulting in loss of vitamins can reach 60%. Hardware design of traditional processes for processing fruits and vegetables, as a rule, is not sufficiently unified, inconvenient in operation and is designed for high productivity. One of the most problematic places is the significant energy and metal waste of traditional equipment and the insufficiently high quality of the finished product. The intensification of the processing of fruit and berry raw materials is possible through the introduction of new technologies and equipment, the use of which can reduce the cost of energy and material resources. During the study, the experimental results of the developed paste were used: apple – 60%; apricot – 30%; cornel – 10%, taking into account organoleptic and physico-chemical indicators. For the technological process of paste production, a hardware line was selected using the developed universal multifunctional device (UMD) and a rotary film device (RFD). This will provide a guaranteed increase in technical and operational indicators with a significant reduction in energy and metal consumption compared to existing analogues. It has been established that for effective puree evaporation in RFD from 11-14% to 27-30% dry matter, it is necessary to grind the raw material to a particle diameter of not more than 0.1-0.5 mm after RFD cooking. The processing temperature of puree in RFD is 62-67 °C, and the concentration time is 2-3 minutes. To reduce the evaporation period and more rational use of RFD, before this operation it is necessary to apply puree to 55-60 °C. The introduction of the developed instrument-technological line will contribute to the production of competitive semi-finished products of high quality with a wide range of uses in food production and restaurant facilities. Author Biographies Kateryna Kasabova, Kharkiv State University of Food Technology and Trade, 333, Klochkivska str., Kharkiv, Ukraine, 61051 PhD, Associate Professor Department of Technology of Bakery, Confectionary, Pasta and Food Concentrates

Anahtar Kelimeler:

Atıf Yapanlar
Dikkat!
Yayınların atıflarını görmek için Sobiad'a Üye Bir Üniversite Ağından erişim sağlamalısınız. Kurumuzun Sobiad'a üye olması için Kütüphane ve Dokümantasyon Daire Başkanlığı ile iletişim kurabilirsiniz.
Kampüs Dışı Erişim
Eğer Sobiad Abonesi bir kuruma bağlıysanız kurum dışı erişim için Giriş Yap Panelini kullanabilirsiniz. Kurumsal E-Mail adresiniz ile kolayca üye olup giriş yapabilirsiniz.
Benzer Makaleler












Technology Audit and Production Reserves

Alan :   Fen Bilimleri ve Matematik

Dergi Türü :   Uluslararası

Metrikler
Makale : 2.454
Atıf : 270
2023 Impact/Etki : 0.047
Technology Audit and Production Reserves