Kullanım Kılavuzu
Neden sadece 3 sonuç görüntüleyebiliyorum?
Sadece üye olan kurumların ağından bağlandığınız da tüm sonuçları görüntüleyebilirsiniz. Üye olmayan kurumlar için kurum yetkililerinin başvurması durumunda 1 aylık ücretsiz deneme sürümü açmaktayız.
Benim olmayan çok sonuç geliyor?
Birçok kaynakça da atıflar "Soyad, İ" olarak gösterildiği için özellikle Soyad ve isminin baş harfi aynı olan akademisyenlerin atıfları zaman zaman karışabilmektedir. Bu sorun tüm dünyadaki atıf dizinlerinin sıkça karşılaştığı bir sorundur.
Sadece ilgili makaleme yapılan atıfları nasıl görebilirim?
Makalenizin ismini arattıktan sonra detaylar kısmına bastığınız anda seçtiğiniz makaleye yapılan atıfları görebilirsiniz.
 Görüntüleme 5
 İndirme 2
MODELE DAYALI KÜMELEME ANALİZİNDE OPTİMUM KÜMELEME İÇİN YENİ BİR YAKLAŞIM
2020
Dergi:  
Mühendislik Bilimleri ve Tasarım Dergisi
Yazar:  
Özet:

Sonlu karma modellerde bileşen (küme) sayısının belirlenmesi önemli bir problem olup normal karma modeller, sonlu karma dağılımlarda sıklıkla kullanılmaktadır. Bu çalışmada, çok kriterli karar verme yöntemlerinden biri olan TOPSIS yöntemi ile çok değişkenli veri setinin modellenmesinde yeni bir kümeleme yöntemi önerilmiştir. Önerilen yöntemde, çok değişkenli verinin her bir değişkeni tek değişkenli normal karma dağılımlarla modellenip, bileşen sayısına göre elde edilen bilgi kriteri değerleri kullanılarak bir karar matrisi oluşturulmuştur. Karar matrisi kullanılarak TOPSIS yöntemi ile değişkenlerdeki bileşen sayısı belirlenmiştir. Bileşen bulunmayan homojen değişkenler elenerek boyut indirgenmiş olup heterojen değişkenlerdeki bileşen sayılarına göre oluşabilecek karma modeller için alternatif bileşen sayıları hesaplanmıştır. Alternatif bileşen sayıları içerisinden en uygun bileşen sayısı ve uygun karma model yine TOPSIS yöntemi ile belirlenmiştir. Böylece çok değişkenli veride boyut indirgeme ve değişken seçimi ile küme sayısı tahmini yapılmıştır. Önerilen yaklaşımın başarısı gerçek veri seti üzerinde test edilmiş olup veri setinin küme sayısı doğru olarak belirlenmiştir. Ayrıca bu yaklaşım, gözlemlerin sınıflandırma başarısını da arttırmıştır.

Anahtar Kelimeler:

A new approach to optimum cumulation in the analysis of the model
2020
Yazar:  
Özet:

The determination of the number of components (components) in the final karma models is a major problem and the normal karma models are often used in the final karma distribution. In this study, a new assembly method was proposed in the modeling of a multi-variable data set with the TOPSIS method, one of the multi-critical decision-making methods. In the proposed method, each variable of the multi-variable data is modeled with single-variable normal mixed distribution and a decision matrix is created using the information criterion values obtained according to the number of components. The decision matrix is used to determine the number of components in the variables by the TOPSIS method. Non-component homogeneous variables are eliminated by decreasing size and calculated the number of alternative components for karma models that can be formed according to the number of components in heterogeneous variables. The most suitable number of components and the most suitable karma model of the alternative components are determined by the TOPSIS method. Thus, the multi-variable data has been estimated with size reduction and variable selection. The success of the proposed approach has been tested on the actual data set and the number of sets of the data set has been correctly determined. This approach also increased the success of classification of observations.

Anahtar Kelimeler:

A New Approach To Optimum Clustering In Model-based Cluster Analysis
2020
Yazar:  
Özet:

Determining the number of components in finite mixture models is an important problem, and normal mixture models are frequently used in finite mixture distributions. In this study, In this study, a new clustering method is proposed for modeling multivariate data set with TOPSIS method. In the proposed method, each variable of multivariate data is modeled with univariate normal mixture distributions and a decision matrix is created by using the information criterion values obtained according to the number of components. The number of components in the variables was determined with TOPSIS method using the decision matrix. Homogeneous variables without components are eliminated and the size is reduced, and alternative component numbers are calculated for mixture models that can be formed according to the number of components in heterogeneous variables. Among the alternative number of components, the most suitable component number and suitable mixture model were determined by TOPSIS method. Thus, in multivariate data, number of clusters were estimated with dimension reduction and variable selection. The success of the proposed approach has been tested on the real dataset and the number of clusters of the data set has been determined correctly. In addition, this approach increased the classification success of the observations.

Anahtar Kelimeler:

Atıf Yapanlar
Bilgi: Bu yayına herhangi bir atıf yapılmamıştır.
Benzer Makaleler




Mühendislik Bilimleri ve Tasarım Dergisi

Alan :   Mimarlık, Planlama ve Tasarım; Mühendislik

Dergi Türü :   Uluslararası

Metrikler
Makale : 986
Atıf : 2.265
2023 Impact/Etki : 0.129
Mühendislik Bilimleri ve Tasarım Dergisi