Araştırma 2016 ve 2017 yıllarında yürütüldü. ‘0900 Ziraat’ kiraz çeşidine, 5 bor uygulaması yapıldı. Kontrol ile birlikte, bir uygulama sadece topraktan, diğer 3 uygulama, farklı doz ve zamanlarda ağaçlara yapıldı. Çiçeklenme döneminde ağaçlara uygulanan Bor, verimde artışa neden oldu. En iri meyveler, topraktan bor uygulamasından elde edildi(11.58 g). Çatlama oranına, bor uygulamalarının hepsi olumlu etki yaptı. En iyi sonuç, aynı ağaçlara çiçeklenme başlangıcı ve çiçeklenme sonunda bor uygulamasından elde edildi(0.2 ppm+0.2 ppm) ve çatlama oranında yaklaşık %30 ‘luk bir azalma sağladı. En yüksek SÇKM değeri, çiçeklenme başlangıcındaki uygulamadan elde edildi( %17.50). En yüksek meyve eti sertliği ikinci yıl, çiçeklenme sonu bor uygulamasından elde edildi( 0.80 newton). Bor uygulamaları kolay ve düşük maliyetlidir. Bu araştırma sonucuna göre bor uygulamaları en önemli fizyolojik bozukluk olan çatlama oranını düşürmüş ve verim artışı sağlamıştır. Diğer bazı kalite özelliklerine de olumlu etkisi olmuştur. Sonuç olarak, “çiçeklenme başlangıcı ve çiçeklenme sonunda, aynı ağaçlara 2 kez yapılan bor uygulaması(0.2 ppm+0.2 ppm)” önerilir.
The research was conducted in 2016 and 2017. The '0900 Ziraat' variety of cherry, 5 bor applications were made. With control, one application was done only from the soil, the other 3 applications, different doses and times to the trees. The bor applied to the trees during the flowering period has caused an increase in productivity. The greatest fruits were obtained from the soil from the bor application (11.58 g). At the breakthrough rate, all of the bor applications had a positive impact. The best result was from the application of the bor at the beginning of flowering and the end of flowering to the same trees (0.2 ppm+0.2 ppm) and a reduction of about 30% in the breakthrough rate. The highest SCHM value was obtained from the application at the beginning of the flowering (17.50 %). The highest fruit meat hardness was obtained in the second year, the end of flowering was from the bor application( 0.80 newton). Bor applications are easy and low-cost. According to this study, bor applications have reduced the breakdown rate, the most important physiological disorder, and provided an increase in efficiency. It has also had a positive impact on some other quality characteristics. As a result, it is recommended that "in the beginning of flowering and in the end of flowering, the bor application is made 2 times on the same trees (0.2 ppm + 0.2 ppm)."
Alan : Fen Bilimleri ve Matematik; Ziraat, Orman ve Su Ürünleri
Dergi Türü : Uluslararası
Benzer Makaleler | Yazar | # |
---|
Makale | Yazar | # |
---|