User Guide
Why can I only view 3 results?
You can also view all results when you are connected from the network of member institutions only. For non-member institutions, we are opening a 1-month free trial version if institution officials apply.
So many results that aren't mine?
References in many bibliographies are sometimes referred to as "Surname, I", so the citations of academics whose Surname and initials are the same may occasionally interfere. This problem is often the case with citation indexes all over the world.
How can I see only citations to my article?
After searching the name of your article, you can see the references to the article you selected as soon as you click on the details section.
 Views 17
 Downloands 5
Seramik Takviyeli Al6061 Matrisli MMK’ların Vakum İnfiltrasyon Yöntemi ile Üretimi ve Yaşlandırma Isıl İşlemi
2023
Journal:  
Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji
Author:  
Abstract:

Bu çalışmada, vakum infiltrasyon yöntemiyle Al6061 matrisli, % ağırlıkça farklı miktarlarda TiC, SiC ve B4C içeren hibrit takviyeli kompozitler üretilmiştir. Üretilen numunelere, 540ºC sıcaklıkta 3 saat çözündürme işlemi sonrasında 130ºC sıcaklıkta, 3’er saat aralıklarla toplam 24 saat yaşlandırma ısıl işlemi uygulanmıştır. Üretim ve ısıl işlemlerden sonra hibrit kompozitlere homojenliğini ve ıslatılabilirliğini değerlendirmek için FESEM, EDS ve XRD analizleri yapılmıştır. Analiz sonuçları değerlendirildiğinde; üretilen kompozitlerdeki takviyeler matris içinde homojen olarak dağılmıştır. Bu takviyeler 900ºC ergitme sıcaklığında, 5 dakika süreyle 520mmHg vakum ortamında üretilen yapılarda iyi ıslatılabilirlik sergilemiştir. Ayrıca ısıl işlemlerden sonra mikro sertlik ölçümleri yapılmıştır. Çözündürme sonrası uygulanan yaşlandırma sıcaklığına bağlı olarak sertliğin 18 saate kadar arttığı, 18 saat süreden sonra ise düştüğü görülmüştür.

Keywords:

Production and Aging Heat Treatment Of Ceramic Reinforced Al6061 Matrix Mmcs By Vacuum Infiltration Method
2023
Author:  
Abstract:

In this study, hybrid reinforced composites with Al6061 matrix and different %wt. amounts TiC, SiC and B4C were produced by vacuum infiltration method. After dissolution at 540ºC for 3 hours, aging heat treatment was applied to the produced samples at 130ºC with 3-hour intervals for a total of 24 hours. FESEM, EDS and XRD analyzes were performed to evaluate the homogeneity and wettability of hybrid composites after production and heat treatment. When the analysis results were evaluated; reinforcements in the produced composites were homogeneously dispersed in the matrix. These reinforcements exhibited good wettability in the structures produced in a 520mmHg vacuum environment for 5 minutes at a melting temperature of 900ºC. In addition, microhardness measurements were made after the heat treatments. Depending on the aging temperature applied after dissolution, it was observed that the hardness increased up to 18 hours and decreased after 18 hours.

Keywords:

Citation Owners
Information: There is no ciation to this publication.
Similar Articles






Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji

Field :   Mühendislik

Journal Type :   Ulusal

Metrics
Article : 690
Cite : 1.576
2023 Impact : 0.057
Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji