Yerel zemin koşullarının, yapıların sismik davranışlarını etkilediği bilinen bir gerçektir. Son olarak 2018 yılında güncellenmiş olan depreme dayanıklı yapı tasarım ilkeleri ile yerel zemin sınıfları da değişmiştir. Bu değişimlerin başında, zeminin zayıf olduğu durumlara ve yüksek katlı yapılara özel yeni hesap yaklaşımları getirmesidir. Dahası bu özel hesapların uzman kişilerce kontrolü zorunlu tutulmuştur. Güncel deprem yönetmeliğinde yer alan yerel zemin koşulları dikkate alınarak örnek olarak seçilen betonarme bir yapıda yer alan bir düzlem çerçeve için deprem etkileri altında kesit tesirleri elde edilmiştir. Bitlis iline ait herhangi bir coğrafi noktada, beş farklı yerel zemin sınıfı için (ZA, ZB, ZC, ZD ve ZE) öncellikle deprem parametrelerinin değişimi incelenmiştir. Her bir zemin sınıfı için kısa harita spektral ivme katsayıları, en büyük yer ivmesi, en büyük yer hızı, spektral ivme katsayıları yatay ve düşey elastik tasarım ivme spektrum köşe periyotları elde edilmiştir. Her bir yerel zemin sınıfı için elde edilen değerler kullanılarak iki katlı bir betonarme yapı için hesaplamalar yapılarak deprem kesit tesirleri hesaplanmıştır. Bu çalışma ile yeni yönetmelikteki zemin sınıflarının değişimi dikkate alınarak deprem parametreleri ve kesit tesirleri üzerindeki etkileri hesaplanmıştır.
It is a well-known fact that local ground conditions affect the seismic behavior of structures. Lastly, the earthquake-resistant building design principles, which were updated in 2018, have also changed the local floor classes. At the beginning of these changes, it is to bring new accounting approaches specific to the conditions where the ground is weak and the high floor structures. In addition, these special accounts have been compulsory to be controlled by experts. Considering the local ground conditions contained in the current earthquake regulations, cuts under the earthquake effects have been obtained for a flat frame that is located in a chosen concrete structure as an example. In any geographical point of Bitlis province, for five different local ground classes (ZA, ZB, ZC, ZD and ZE) the change of earthquake parameters has been first studied. For each floor class, the short map has been obtained spectral vibration ratio, the greatest ground vibration, the greatest ground speed, the spectral vibration ratio horizontal and the elastice design of the vibration spectral corner periods. Earthquake cuts are calculated by making calculations for a two-storey concrete structure using the values obtained for each local ground class. This study has calculated the effects on earthquake parameters and cuts, taking into account the changes in the ground classes in the new regulations.
Alan : Mühendislik
Dergi Türü : Ulusal
Benzer Makaleler | Yazar | # |
---|
Makale | Yazar | # |
---|